In this work, a smart self-healing coating with long-term anticorrosion ability was developed based on multiresponsive polyaniline (PANI) porous microspheres. The polyaniline porous microspheres loaded with corrosion inhibitor (benzotriazole, BTA) was prepared by the emulsion template method and photopolymerization. The BTA loaded in the polyaniline microspheres acted as a corrosion inhibitor, while the polyaniline in the shell performed the multiple functions of corrosion inhibition, pH-responsive and photoresponsive release, and photothermal conversion. Owing to the inherent corrosion-inhibiting nature of BTA and PANI, the BTA-loaded polyaniline microsphere could endow coating with dual anticorrosive properties. The coating with polyaniline microspheres did not show any corrosion product after 700 h of salt spray testing, while obvious pitting corrosion could be observed for the blank coating after 100 h of the salt spray test. Thanks to the photothermal properties of PANI, the composite coating exhibited self-healing behavior under NIR light irradiation. The coating with 10 wt % polyaniline microspheres could achieve rapid closure and recover its barrier properties within 5 s of NIR irradiation. And the release of BTA could form a passivation film on scratches to further repair coating defects. The on-command responsive release, high healing efficiency, and excellent anticorrosion properties of this dual self-healing anticorrosion coating provide perspectives on extending the service life of metals.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acs.langmuir.4c01703 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Hierarchically Porous Carbon Microspheres Coated with MnO Nanosheets as the Sulfur Host for High-Loading Lithium-Sulfur Batteries.
Molecules
December 2024
Shanxi Key Laboratory of Carbon Materials, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001, China.
Lithium-sulfur (Li-S) batteries have emerged as a promising candidate for next-generation high-energy rechargeable lithium batteries, but their practical application is impeded by the sluggish redox kinetics and low sulfur loading. Here, we report the in situ growth of δ-MnO nanosheets onto hierarchical porous carbon microspheres (HPCs) to form an HPCs/S@MnO composite for advanced lithium-sulfur batteries. The delicately designed hybrid architecture can effectively confine LiPSs and obtain high sulfur loading up to 10 mg cm, in which the inner carbon microspheres with a large pore volume and large specific surface area can encapsulate high sulfur content, and the outer MnO nanosheets, as a catalytic layer, can improve the conversion reaction of LiPSs and suppress the shuttle effect.
View Article and Find Full Text PDFMolecule self-assembly of hydrangea-shaped hollow O, Cl -codoped graphite-phase carbon nitride microspheres for efficient N-(1,3-dimethyl butyl)-N'-phenyl-p-phenylenediamine quinone photodegradation and bacteria disinfection.
J Colloid Interface Sci
January 2025
College of Materials and Chemistry, China Jiliang University, 258 Xueyuan Street, Xiasha Higher Education Zone, Hangzhou 310018, China. Electronic address:
6PPD-quinone (6PPD-Q) as a derivative of the rubber antioxidant N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD), is attracting intensive attention due to the significant hazard to ecosystems. However, the effective management of this type of contaminant has been scarcely reported. Hydrangea-like hollow O, Cl-codoped graphite-phase carbon nitride microspheres (HHCN), featuring open pores were readily prepared by molecular self-assembly and utilized to address 6PPD-Q in an aqueous system for the first time.
View Article and Find Full Text PDFHierarchical Self-Assembly of SnO Nanoparticles into Porous Microspheres: Exceptionally Selective Ammonia Sensing at Ambient.
ACS Appl Mater Interfaces
January 2025
Nanomaterials Laboratory, Department of Polymers and Functional Materials, CSIR-Indian Institute of Chemical Technology, Uppal Road, Tarnaka, Hyderabad 500 007, India.
Herein, porous SnO microspheres in a three-dimensional (3D) hierarchical architecture were successfully synthesized via a facile hydrothermal route utilizing d-(+)-glucose and cetyltrimethylammonium bromide (CTAB), which act as reducing and structure-directing agents, respectively. Controlled adjustment of the CTAB to glucose mole ratio, reaction temperature, reaction time, and the calcination parameters all provided important clues toward optimizing the final morphologies of SnO with exceptional structural stability and reasonable monodispersity. Electron microscopy analysis revealed that microspheres formed were hierarchical self-assemblies of numerous primary SnO nanoparticles of ∼3-8 nm that coalesce together to form nearly monodispersed and ordered spherical structures of sizes in the range of 230-250 nm and are appreciably porous.
View Article and Find Full Text PDFIn Situ Cascade Catalytic Polymerization of Dopamine Based on Pt NPs/CoSAs@NC Nanoenzyme for Constructing Highly Sensitive Photocurrent-Polarity-Switching PEC Biosensing Platform.
Small
January 2025
State Key Laboratory of Chemo/Biosensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, P.R. China.
Nanozymes open up new avenues for amplifying signals in photoelectrochemical (PEC) biosensing, which are yet limited by the generated small-molecule signal reporters. Herein, a multifunctional nanoenzyme of Pt NPs/CoSAs@NC consisting of Co single atoms on N-doped porous carbon decorated with Pt nanoparticles is successfully synthesized for cascade catalytic polymerization of dopamine for constructing a highly sensitive photocurrent-polarity-switching PEC biosensing platform. Taking protein tyrosine phosphatase 1B (PTP1B) as a target model, Pt NPs/CoSAs@NC nanoenzymes are linked to magnetic microspheres via phosphorylated peptides.
View Article and Find Full Text PDFThe synthesis of an iron tailings-based geopolymer with synergistic electromagnetic wave consumption property.
Environ Res
January 2025
School of Materials Science and Engineering, Fuzhou University, Fuzhou, Fujian, 350108, China; Zijin School of Geology and Mining, Fuzhou University, Fuzhou, Fujian, 350108, China; Fujian Key Laboratory of Green Extraction and High-value Utilization of Energy Metals, Fuzhou University, Fuzhou, Fujian 350108, China.
In this study, combination of wave absorption materials with different loss mechanisms are added into iron ore tailings-blast furnace slag (IOT-BFS) based geopolymers. The employed materials are hollow glass microsphere (HGM), carbon nanotubes (CNT) and carbonyl iron powder (CIP). Microstructures of the geopolymers are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and concrete porous structure analyzer.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!