In this paper, we present a new design for a chronoamperometric flow cell in which air bubbles do not interfere with the control of potential between the working and reference electrodes. The flow-through dual-detection cell consists of two independent parts: an upper compartment containing a quiescent supporting electrolyte solution and a channel that operates under hydrodynamically controlled conditions. In this system, the working and counter electrodes can be placed directly in contact with both compartments, whereas the reference electrode can be assembled to be either isolated or in contact with the flowing stream channel. The design ensures that the potential applied to the working electrode (controlled in the upper compartment) is similar to the potential applied in the flowing channel. The performance of the proposed flow cell in generating accurate results, even in the presence of air bubbles, was evaluated through successive air-analyte-air injections. In both series where the analyte was introduced, suitable reproducibility was achieved. The robustness of the design was definitively proven by performing a series of measurements in analytical applications for the determination of hydrogen peroxide in antiseptic samples, yielding very satisfactory results.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.talanta.2024.126875 | DOI Listing |
Food Res Int
January 2025
State Key Laboratory of Food Nutrition and Safety, Key Laboratory of Food Nutrition and Safety, Ministry of Education, College of Food Science and Engineering, Tianjin University of Science & Technology, No. 9, No. 13 Ave., TEDA, Tianjin 300457, China. Electronic address:
There is an urgent need for stable, plant-based Pickering foams to address the growing consumer demand for sustainable, low-calorie, aerated sweet foods. This study employed a cold plasma-assisted deamidation and glycosylation (CPDG) approach to promote hydrophilic reassembly of zein, resulting in the formation of sugar derivative-zein conjugates. This was accomplished by coupling deamidated zein with polyhydroxy sugars including sucralose (Suc), maltitol (Mal), mannitol (Man), and stevioside (Ste).
View Article and Find Full Text PDFCarbohydr Polym
March 2025
Shanghai Key Laboratory of Regulatory Biology, School of Life Sciences, East China Normal University, Shanghai 200241, PR China. Electronic address:
Cellulose foams are renewable and biodegradable materials that are promising substitutes for plastic foams. However, the scale-up fabrication of cellulose foams is severely hindered by technological complexity and cost- and time-consuming drying processes. Here, we developed a facile and robust method to fabricate cellulose foams via oven-drying following surfactant-assisted mechanical foaming of cellulose nanofibers (CNFs).
View Article and Find Full Text PDFCarbohydr Polym
March 2025
National Engineering Research Center for Functional Food, Collaborative Innovation Center of Food Safety and Quality Control in Jiangsu Province, School of Food Science and Technology, Jiangnan University, Wuxi 214122, Jiangsu, China; Binzhou Zhongyu Food Company Limited, Binzhou Zhongyu Academy of Agricultural Sciences, National Industry Technical Innovation Center for Wheat Processing, Binzhou 256603, Shandong, China; Bohai Advanced Technology Institute, Binzhou 256606, Shandong, China.
In this study, the improvement effects of different polymeric saccharides, including native starch, maltodextrin and inulin, replacing 10 % sucrose on the physical characteristics and creaminess perception of non-fat whipped cream system were investigated. Systems containing maltodextrin had more uniform particle size and bubble distribution. This resulted in higher whipping performance and lower friction characteristics.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
I2M (Institut de Mécanique et d'Ingénierie), UMR 5295, CNRS, University of Bordeaux, 33400 Talence, France.
From both economic and environmental points of view, the reuse of dredged sediments in the direct onsite casting of concrete represents a promising method for replacing sand. The aim of this study was to develop a cementitious material that (i) reuses the thin particles of sediments; (ii) has a low density due to the incorporation of air foam in the material; and (iii) achieves a minimum mechanical strength of 0.5 MPa for embankment applications.
View Article and Find Full Text PDFMedicina (Kaunas)
December 2024
Department of Cardiac Surgery, Anthea Hospital GVM Care and Research, Via Camillo Rosalba 35/37, 70124 Bari, Italy.
In coronary artery bypass grafting (CABG) on pump, achieving optimal visualization is critical for surgical precision and safety. The use of blowers to clear the CABG anastomosis poses risks, including the formation of micro-embolic gas bubbles, which can be insidious and increase the risk of cerebral or myocardial complications. This retrospective study compares the effectiveness of the use of irrigation mist and CO versus a direct CO blower without irrigation in terms of visualization, postoperative fibrillation, and micro-embolic gas activity.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!