Background: Premature degradation is the problem of maxillofacial silicones, significantly affected by ultraviolet exposure, contributing to silicones photodegradation. Degradation necessitates frequent replacement of prostheses that increase the total cost of rehabilitation.
Aims: This study evaluated the effect of bisoctrizole on the ultraviolet absorption properties of silicone material and the stability of this absorption over time. Also, the bisoctrizole effect on the surface roughness of silicone was evaluated.
Methods: There were 60 prepared specimens of room temperature-vulcanising maxillofacial silicone equally divided into two groups according to the conducted tests: ultraviolet absorption test and the surface roughness test. Each group was further subdivided into groups of 10 specimens based on the weight concentration of the ultraviolet (UV) absorber added: 0%, 1% and 2%. The UV absorbance of coloured specimens was measured before and after artificial weathering for 100 and 200 hours. Repeated-measures analysis of variance (ANOVA) was applied for UV absorption results, and one-way ANOVA was applied for the roughness test results to test the changing significances.
Result: Bisoctrizole incorporation led to a highly significant improvement in ultraviolet absorption in all groups, maintaining a high level even after subjecting the specimens to artificial weathering. Furthermore, the addition resulted in a significant increase in surface roughness as the concentration of bisoctrizole increased.
Conclusion: Despite the surface roughness changes, bisoctrizole demonstrated efficacy as a UV absorber for maxillofacial silicone, making it valuable for applications such as maxillofacial prosthetics that require UV protection.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.4103/ijdr.ijdr_703_23 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Decomposition of friction coefficients to analyze hydration effects on a C60(OH)n.
J Chem Phys
December 2024
Department of Chemistry, Kyushu University, Fukuoka 812-0395, Japan.
To analyze hydration effects on macromolecular diffusion, the friction coefficients of macromolecules were examined using molecular dynamics simulations with an all-atom model. In the present study, a method was introduced to decompose the molecular friction coefficient into the contributions for each site on the macromolecule. The method was applied to several fullerenols in ambient water.
View Article and Find Full Text PDFFrictional adhesion of geckos predicts maximum running performance in nature.
J Exp Biol
January 2025
Department of Evolution, Ecology, and Organismal Biology, University of California, Riverside, CA 92521, USA.
Despite the myriad studies examining the diversity and mechanisms of gecko adhesion in the lab, we have a poor understanding of how this translates to locomotion in nature. It has long been assumed that greater adhesive strength should translate to superior performance in nature. Using 13 individuals of Bradfield's Namib day gecko (Rhoptropus bradfieldi) in Namibia, I tested the hypothesis that maximum running performance in nature (speed and acceleration) is driven by maximum frictional adhesive strength.
View Article and Find Full Text PDFThe need for better metrics for floor-tile topography: Conventional metrics correlate only modestly with shoe-floor friction.
Tribol Int
May 2024
Department of Bioengineering, University of Pittsburgh, 3700 O'Hara St., Benedum Hall Room 302, Pittsburgh, PA 15261.
Roughness metrics measured with stylus profilometry are commonly used to explain a floor's friction performance, yet these metrics inconsistently predict shoe-floor friction. While strong correlations have been shown for systematically modified flooring, the goal of this study is to address a gap regarding the predictive ability of these metrics across heterogeneous porcelain flooring products. The predictive ability of four roughness metrics on oily friction performance was assessed using 23 floors and 4 shoe designs.
View Article and Find Full Text PDFAnchorable Polymers Enabling Ultra-Thin and Robust Hole-Transporting Layers for High-Efficiency Inverted Perovskite Solar Cells.
Angew Chem Int Ed Engl
January 2025
Key Laboratory for Advanced Materials and Joint International Research Laboratory of Precision Chemistry and Molecular Engineering, Shanghai Key Laboratory of Functional Materials Chemistry, Feringa Nobel Prize Scientist Joint Research Center, Frontiers Science Center for Materiobiology and Dynamic Chemistry, Institute of Fine Chemicals, School of Chemistry and Molecular Engineering, East China University of Science and Technology, Shanghai, China.
Currently, the development of polymeric hole-transporting materials (HTMs) lags behind that of small-molecule HTMs in inverted perovskite solar cells (PSCs). A critical challenge is that conventional polymeric HTMs are incapable of forming ultra-thin and conformal coatings like self-assembly monolayers (SAMs), especially for substrates with rough surface morphology. Herein, we address this challenge by designing anchorable polymeric HTMs (CP1 to CP5).
View Article and Find Full Text PDFMorphological Features Influence the Drug Loading and Delivery Efficacy of Photoactivatable Gold Nanocarriers for Antitumor Photo/Chemotherapy.
ACS Appl Mater Interfaces
January 2025
Institute of Optical Functional Materials for Biomedical Imaging, School of Chemistry and Pharmaceutical Engineering, Shandong First Medical University & Shandong Academy of Medical Science, Taian, Shandong 271016, PR China.
Photoactivatable gold nanocarriers are transforming antitumor therapies by leveraging their distinctive physicochemical properties, enabling targeted drug delivery and enhanced therapeutic efficacy in cancer treatment. This study systematically investigates how surface topography and morphology of gold nanocarriers influence drug loading capacity, light-to-heat conversion efficiency, and overall therapeutic performance in photo/chemotherapy. We synthesized four distinct morphologies of gold nanoparticles: porous gold nanocups (PAuNCs), porous gold nanospheres (PAuNSs), solid gold nanocups (SAuNCs), and solid gold nanospheres (SAuNSs).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!