The use of heterogeneous catalysts to increase the development of green chemistry is a rapidly growing area of research to save industry money. In this paper, mesoporous SiO-AlO mixed oxide supports with various Si/Al ratios were prepared using two different sol-gel routes: hydrolytic sol-gel (HSG) and non-hydrolytic sol-gel (NHSG). The HSG route was investigated in both acidic and basic media, while the NHSG was explored in the presence of ethanol and diisopropyl ether as oxygen donors. The resulting SiO-AlO mixed oxide supports were characterized using EDX, N physisorption, powder XRD, Si, Al MAS-NMR and NH-TPD. The mesoporous SiO-AlO supports prepared by NHSG seemed to be more regularly distributed and also more acidic. Consequently, a simple one-step NHSG (ether and alcohol routes) was selected to prepare mesoporous and acidic SiO-AlO-NiO mixed oxide catalysts, which were then evaluated in ethylene oligomerization. The samples prepared by the NHSG ether route showed better activity than those prepared by the NHSG alcohol route in the oligomerization of ethylene at 150 °C.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11397447 | PMC |
http://dx.doi.org/10.3390/molecules29174172 | DOI Listing |
World J Microbiol Biotechnol
January 2025
Key Laboratory for Humid Subtropical Eco-Geographical Processes of the Ministry of Education, School of Geographical Sciences, Fujian Normal University, Fuzhou, China.
Nitrification, the oxidation of ammonium to nitrate via nitrite, links nitrogen fixation and nitrogen loss processes, playing key roles in coastal nitrogen cycle. However, few studies have simultaneously examined both ammonia-oxidizing and nitrite-oxidizing microbes. This work investigated the abundance and community structure of ammonia-oxidizing archaea (AOA), ammonia-oxidizing bacteria (AOB), and nitrite-oxidizing bacteria (NOB) using archaeal amoA gene, bacterial amoA gene, and NOB nxrB gene, respectively, through q-PCR and Sanger sequencing along the Changjiang Estuary salinity gradient.
View Article and Find Full Text PDFJ Mater Chem A Mater
January 2025
MESA+ Institute for Nanotechnology, University of Twente 7500 AE Enschede Netherlands
The advancement of rapid-response grid energy storage systems and the widespread adoption of electric vehicles are significantly hindered by the charging times and energy densities associated with current lithium-ion battery technology. In state-of-the-art lithium-ion batteries, graphite is employed as the standard negative electrode material. However, graphite suffers from polarization and deteriorating side-reactions at the high currents needed for fast charging.
View Article and Find Full Text PDFChem Mater
January 2025
Department of Chemistry and Nanoscience Center, University of Copenhagen, 2100 Copenhagen Ø, Denmark.
Bismuth ferrites, specifically perovskite-type BiFeO and mullite-type BiFeO, hold significant technological promise as catalysts, photovoltaics, and room-temperature multiferroics. However, challenges arise due to their frequent cocrystallization, particularly in the nanoregime, hindering the production of phase-pure materials. This study unveils a controlled sol-gel crystallization approach, elucidating the phase formation complexities in the bismuth ferrite oxide system by coupling thermochemical analysis and total scattering with pair distribution function analysis.
View Article and Find Full Text PDFACS Omega
January 2025
Department of Chemical Engineering, Süleyman Demirel University, Isparta 32260, Turkey.
Polylactic acid (PLA) composite fibers were obtained using melt electrospinning, in which a high voltage was applied to the nozzle of the 3D printer. Filaments for melt electrospinning were prepared by using an extruder operated at 155 °C. PLA was mixed with polycaprolactone (PCL; 95:5, 90:10, and 85:15 by wt %), zinc oxide (ZnO; 0.
View Article and Find Full Text PDFACS Omega
January 2025
Institute of Process Research and Development, School of Chemistry, University of Leeds, Woodhouse Lane, Leeds LS2 9JT, U.K.
One use of CO as a starting material in organic transformations is in the synthesis of cyclic carbonates and polycarbonates. Due to the low reactivity of CO, this transformation must be carried out in the presence of an efficient catalyst. Although several catalytic systems have been developed in the past decade, reducing the CO pressure at which the reaction is carried out remains one of the main challenges of the process.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!