AI Article Synopsis

  • This study presents a novel approach to recycle spent graphite from lithium-ion battery waste to create graphene oxide (GO) for use in zinc-ion batteries (AZIB).
  • The synthesized GO from spent graphite (SG-GO) demonstrates superior electrochemical performance, achieving a charge capacity of 270 mAh/g compared to 198 mAh/g for commercial graphite-derived GO at the same current density.
  • Long-term tests show SG-GO maintains 77.3% capacity retention after 1000 cycles, with optimal performance observed using a 3 M ZnSO electrolyte for improved zinc ion storage.

Article Abstract

The need for revamping spent graphite (SG) from battery waste of commercial lithium-ion batteries and employing it as a source for the synthesis of graphene oxide (GO) is focused. Thus, this work emphasizes the study of GO sheets, synthesized via modified Hummer's method from spent graphite (SG-GO) as cathodes for an aqueous zinc ion battery (AZIB) system, for the first time in literature. For comparison, graphene oxide is also synthesized using commercial graphite powder, its structural and morphological properties are analyzed with SG-GO. The coin cell AZIB device is fabricated for both the GOs and the electrochemical performances revealed that SG-GO portrayed an enhanced charge capacity of 270 mAh g at 0.1 A g in 3 m ZnSO in comparison to GO which delivered ≈198 mAh g at the same current density of 0.1 A g. The long-run cycling analysis of SG-GO elucidated the capacity retention of 77.3% at 1 A g even after 1000 cycles. Moreover, the performance of SG-GO is inspected in different electrolyte systems and the suitable electrolyte underwent concentration variation studies to figure out the capability of the system in storing Zn ions which is found to be more in 3 M ZnSO electrolyte.

Download full-text PDF

Source
http://dx.doi.org/10.1002/smll.202404106DOI Listing

Publication Analysis

Top Keywords

graphene oxide
12
spent graphite
8
3 m znso
8
sg-go
5
sustainable fabrication
4
fabrication graphene
4
oxide cathodes
4
graphite
4
cathodes graphite
4
graphite failed
4

Similar Publications

The majority of industries throughout the world rely largely on fossil fuels as their primary energy source. However, these resources are finite and become scarcer by the day. Therefore, exploring alternative fuels and additives for diesel fuel is imperative to mitigate fuel consumption.

View Article and Find Full Text PDF

The performance of nanofluids is largely determined by their thermophysical properties. Optimizing these properties can significantly enhance nanofluid performance. This study introduces a hybrid strategy based on computational intelligence to determine the optimal conditions for ternary hybrid nanofluids.

View Article and Find Full Text PDF

Purpose: This study investigated the synergistic effects of reduced graphene oxide (RGO) on the antibacterial activity of three calcium hydroxide-based intracanal medicaments with different vehicles.

Methods: Multispecies biofilms were cultured in a bovine root canal model. Intracanal medicaments containing nonaqueous vehicles, including N-methyl-2-pyrrolidone (NMP; CleaniCal), propylene glycol (PG; UltraCal XS), and polyethylene glycol (PEG; Calcipex II), were placed in the model.

View Article and Find Full Text PDF

Highly compressible lamellar graphene/cellulose/sodium alginate aerogel via bidirectional freeze-drying for flexible pressure sensor.

Int J Biol Macromol

January 2025

Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, China; College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China. Electronic address:

Graphene exhibits exceptional electrical properties, and aerogels made from it demonstrate high sensitivity when used in sensors. However, traditional graphene aerogels have poor biocompatibility and sustainability, posing potential environmental and health risks. Moreover, the stacking of their internal structures results in low compressive strength and fatigue resistance, which limits their further applications.

View Article and Find Full Text PDF

Light-driven in-situ synthesis of nano-sulfur and graphene oxide composites for efficient removal of heavy metal ions.

J Hazard Mater

January 2025

State Key Lab of Geohazard prevention & Geoenvironment protection, College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, Chengdu 610059, China. Electronic address:

Sulfur nanoparticles (SNPs) and their composites are promising for heavy metal adsorption, yet current SNPs often lack surface S, leading to low affinity toward heavy metal and ease of aggregation. Here, we report a simple light-driven method for facile prepare SNPs with surfaces enriched with S and in-situ load them onto graphene oxide (GO) to fabricate GO-S composites. Under illumination, the O generated by photosensitizer phloxine B was able to oxidize S into elemental SNPs.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!