Dipicolinic acid (DPA) is a major constituent of spores and reportedly provides protection against inactivation by various thermal processes; however, the relationship between DPA and resistance towards pressure-assisted thermal processing is not well understood. Thermal and pressure-assisted thermal inactivation studies of Clostridium botulinum nonproteolytic strains QC-B and 610-F, proteolytic strain Giorgio-A, and thermal surrogate Clostridium sporogenes PA3679 spores suspended in ACES buffer (0.05 M, pH 7.0) were performed to determine if a relationship exists between DPA release and log reduction of spores. Thermal inactivation at 80, 83, and 87 °C for nonproteolytic strains and 101, 105, and 108 °C for the proteolytic strain and thermal surrogate were conducted. Pressure-assisted thermal inactivation for nonproteolytic strains at 83 °C/600 MPa and for the proteolytic strain and thermal surrogate at 105 °C/600 MPa were performed. Surviving spores were enumerated by 5-tube MPN method for log reductions and analyzed for released DPA by liquid chromatography-tandem mass spectrometry. The correlation between MPN log reductions, released DPA, and D-values were calculated. A positive correlation between released DPA and log reduction of spores was observed for QC-B and 610-F at 80 and 83 °C (r = 0.6073 - 0.7755; P < 0.01). At 87 °C, a positive correlation was detected for 610-F (r = 0.4242, P < 0.05) and no correlation was observed for QC-B (r = 0.1641; P > 0.05). A strong, positive correlation (r = 0.8359 - 0.9284; P < 0.05) between released DPA and log reduction of spores was observed for Giorgio-A at 101, 105, and 108 °C, and a strong, positive correlation (r = 0.8402; P < 0.05) was observed for PA3679 at 101 °C. A positive correlation (r = 0.5646 - 0.6724; P < 0.01) was observed for QC-B, 610-F, and Giorgio-A after pressure-assisted thermal treatment. No correlation (r = 02494; P > 0.05) was found for PA3679 after pressure-assisted thermal treatment. These results suggest a correlation exists between DPA release and heat resistance; however, the level of correlation varied between strains and temperatures. The findings from this research may aid in the development of spore inactivation strategies targeting the thermal resistance profiles of various strains of C. botulinum spores.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.jfp.2024.100359 | DOI Listing |
Int J Biol Macromol
December 2024
Food Processing Business Incubation Centre, India. Electronic address:
This study explores the effect of individual and combination treatments of ultrasound (US) and high pressure (HP) on the extraction of pearl millet protein isolate (PMPI). Compared to the conventional extraction technique (control) the millets treated with non-thermal techniques provided a higher protein recovery percentage. The highest recovery of 63.
View Article and Find Full Text PDFFood Res Int
November 2024
Department of Biological Systems Engineering, Washington State University, P.O. Box-646120, WA 99164-6120, USA. Electronic address:
Pressure-assisted thermal sterilization (PATS) utilizes flexible packaging with low oxygen and water vapor transmission rates (OTRs, WVTRs). In this study, pouches made from metal oxide (MO)-coated (A-D) and ethylene vinyl alcohol (EVOH)-containing (E, F) multilayer films were filled with water and mashed potatoes (MP), preheated at 98 ± 0.5 °C for 10 min, and processed using a pilot-scale high-pressure processing machine (HPP) at 600 ± 5 MPa for 300 s.
View Article and Find Full Text PDFJ Phys Chem B
October 2024
Department of Physical Chemistry, University of Pardubice, Studentska 573, 53210 Pardubice, Czech Republic.
The knowledge of viscosity behavior, crystal growth phenomenon, and diffusion is important in producing, processing, and practical applications of amorphous solids prepared in different forms (bulk glasses and thin films). This work uses microscopy to study volume crystal growth in GeSe bulk glasses and thermally evaporated thin films. The collected growth data measured over a wide temperature range show a significant increase in crystal growth rates in thin films.
View Article and Find Full Text PDFMicromachines (Basel)
August 2024
Shandong Junyu Electronic Technology Co., Ltd., Linyi 276100, China.
Chip bonding, an essential process in power semiconductor device packaging, commonly includes welding and nano-silver sintering. Currently, most of the research on chip bonding technology focuses on the thermal stress analysis of tin-lead solder and nano-silver pressure-assisted sintering, whereas research on the thermal stress analysis of the nano-silver pressureless sintering process is more limited. In this study, the pressureless sintering process of nano-silver was studied using finite element software, with nano-silver as an interconnect material.
View Article and Find Full Text PDFJ Food Prot
October 2024
U. S. Food and Drug Administration, Office of Food Safety, Division of Food Processing Science and Technology, Bedford Park, IL 60501, United States.
Dipicolinic acid (DPA) is a major constituent of spores and reportedly provides protection against inactivation by various thermal processes; however, the relationship between DPA and resistance towards pressure-assisted thermal processing is not well understood. Thermal and pressure-assisted thermal inactivation studies of Clostridium botulinum nonproteolytic strains QC-B and 610-F, proteolytic strain Giorgio-A, and thermal surrogate Clostridium sporogenes PA3679 spores suspended in ACES buffer (0.05 M, pH 7.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!