Determining the debris flow yield strength of weathered soils: a case study of the Miryang debris flow in the Republic of Korea.

Debris flow hazards are often interpreted through back-calculated simulation analysis or empirical methods. The mobility of a debris flow is greatly influenced by mechanical and hydrological parameters. The strength parameters play important roles in the debris flow initiation and flow stages. In particular, the rheological parameters of yield strength and plastic viscosity directly affect the debris flow runout distance and velocity. One of the most important parameters to consider when evaluating debris flow hazards is the shear strength. This strength is called the residual shear strength in the failure stage and the yield strength in the post-failure stage. The residual shear strength obtained from ring shear tests can be related to the initiation of mass movements; the yield strength obtained from rheological tests can be related to the mobilization of debris flows. The residual shear stresses obtained from ring shear tests of weathered soils typically range between 10 and 100 kPa and strongly depend on the normal stress and shear velocity. When progressive slope failure (i.e., strain-softening behavior) occurs at a relatively shallow slope depth (e.g., < 1 m), the soil strength ranges from approximately 5-10 kPa. If the liquid limit state (i.e., solid‒liquid transition) is reached, the shear strength of the soil is approximately 2 kPa. Once the soil fails and mixes with ambient water along the slip surface, the yield strength decreases dramatically, resulting in high mobilization. A suggestion on how strength parameters can be applied to estimate debris flow mobility is presented by considering the 2011 Miryang debris flow, which occurred in weathered soil deposits in Miryang city, Republic of Korea. The best approach for debris flow yield strength estimation would be to consider the residual shear strength in the initiation stage, the yield strength in the flow stage, and the reduction in yield strength with the entrainment effect of the flow in the rapid fluidization stage.