With increasing textile consumption and limited sorting and recycling capacities, the EU faces major challenges in terms of managing its textile waste. This study investigates the environmental and socio-economic impacts of explorative policy scenarios for a more sustainable textile waste management system in Europe. These scenarios differ substantially in the amounts of textile waste generated and separately collected, closed-loop recycling capacities and textile waste exports. Our results show that sustainable textile waste management remains highly relevant for the sector. Still, without addressing in parallel prevention of textile waste generation via production and consumption patterns, a climate-neutral and circular textiles sector will be hard to achieve. Interventions in the waste management of textiles could reduce global warming impacts by up to 22.3 Mt CO per year, which translates to an 18% sector-wide impact by 2035. Depending on the intervention(s), the estimated required investment at present amounts to between 7 and 33 billion EUR. The study provides a valuable starting point for evidence-based decisions on future textile policymaking in Europe.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.wasman.2024.08.037 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Performance Enhancement by Integrating the Ionic Thermoelectric Generator with a Photovoltaic Cell.
ACS Appl Mater Interfaces
December 2024
Department of Flexible Sensing Technology, Institute of Chemical Engineering, Guangdong Academy of Sciences, Guangzhou 510665, China.
The global solar market is booming with a rapid growth in installed integrated devices, while photovoltaic (PV) systems are suffering from waste heat, which causes the decline of the photovoltaic conversion efficiency (PCE). This study presents the seamless integration of the ionic thermoelectric generator (iTEG) layer with traditional PV modules, facilitating the exploitation of waste heat and augmenting the overall power output. Experimental results validate the effectiveness of the iTEG, demonstrating substantial power generation and a consistent energy output.
View Article and Find Full Text PDFValorization of textile waste for removal of Cadmium from contaminated water.
Sci Rep
December 2024
Department of Biosystems and Technology, Swedish University of Agricultural Sciences, Alnarp, 23456, Sweden.
The rapid development in agriculture and industrial sectors has raised some serious global issues like heavy metals pollution of water resources. Cadmium (Cd) is amongst the major water pollutants worldwide. In this study, two novel sorbents were prepared by using post-consumer textile waste (PCTW).
View Article and Find Full Text PDFRecently, biomass-derived carbon dots (CDs) have attracted considerable attention in high-technology fields due to their prominent merits, including brilliant luminescence, superior biocompatibility, and low toxicity. However, most of the biomass-derived CDs only show bright fluorescence in diluted solution because of aggregation-induced quenching effect, hence cannot exhibit solid-state long-lived room-temperature phosphorescence (RTP) in ambient conditions. Herein, matrix-free solid-state RTP with an average lifetime of 0.
View Article and Find Full Text PDFInterfacial engineering-based colonization of biofilms on polyethylene terephthalate (PET) surfaces: Implications for whole-cell biodegradation of microplastics.
Sci Total Environ
December 2024
School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China; Key Laboratory for Advanced Textile Composites of the Education Ministry, Tiangong University, Tianjin 300387, China; National Innovation Center of Advanced Dyeing and Finishing Technology, Tai'an, Shandong 271000, China. Electronic address:
Microplastic pollution has become a significant environmental issue. One of the most important sources and components of microplastics is polyester fabric - polyethylene terephthalate (PET). Because the catalytic depolymerization of PET typically requires specific conditions such as alkaline environments, specific solvents, or high temperatures, there is an urgent need for a simpler, eco-friendly solution with high degradation efficiency for managing the vast amounts of PET textile waste.
View Article and Find Full Text PDFRole of mordants in natural fabric dyeing and their environmental impacts.
Environ Sci Pollut Res Int
December 2024
Department of Textile Engineering, BGMEA University of Fashion and Technology (BUFT), Dhaka, 1230, Bangladesh.
The textile industry is undergoing a transformative shift towards sustainability, driven by mounting environmental concerns and consumer demand for eco-friendly products. This review article explores the use of mordants in textile dyeing processes, encompassing both traditional metal mordants and emerging bio-mordants. Metal mordants, commonly used in textile dyeing, present environmental challenges due to their toxic nature.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!