Perylenediimide-chitosan/γ-poly (glutamic acid) microcapsules sizing (PDI-CS/γ-PGA) core-shell microcapsule is designed and used to establish a novel interphase in carbon fiber/epoxy (CF/EP) composite, and the interfacial property, as well as the damage self-reporting of the composite, is compared with desized carbon fiber (CF-desized)/EP and commercial carbon fiber (CF-COM)/EP composite. The ruptured PDI-CS/γ-PGA microcapsule exhibits strong "turn-on" green fluorescence from the released PDI upon mechanical stimuli. The anchoring of PDI-CS/γ-PGA microcapsule on carbon fiber with PDI-CS/γ-PGA microcapsules sizing (CF@PDI-CS/γ-PGA) surface results in increased chemical activity and roughness, exhibiting a weak green fluorescence signal instead of non-fluorescence on CF-desized and CF-COM surface. The transverse fiber bundle tensile (TFBT) strength of CF@PDI-CS/γ-PGA composite is 80.97% and 31.09% higher than those of CF-desized/EP and CF-COM/EP composite, which is attributed to the mechanical interlocking and chemical bonding interaction between carbon fiber and epoxy matrix by introducing PDI-CS/γ-PGA microcapsule with spherular structure and active groups. After microdroplet testing, the strong "turn-on" green fluorescence signal of the released PDI from the microcapsules is detected in the interfacial debonding regions, realizing the microscopic damage self-reporting of CF@PDI-CS/γ-PGA composite.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/marc.202400430 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Temperature dynamics and mechanical properties analysis of carbon fiber epoxy composites radiated by nuclear explosion simulated light source.
Sci Rep
January 2025
Engineering Research Center of Flexible Radiation Protection Technology, Universities of Shaanxi Province, Xi'an Polytechnic University, Xi'an, 710048, Shaanxi, China.
The impact of light radiation, a predominant energy release mechanism in nuclear explosions, on material properties is of critical importance. This investigation employed an artificial light source to replicate the effects of nuclear explosion radiation and utilized a physical information neural network (PINN) to examine the temperature evolution and corresponding changes in the mechanical properties of carbon fiber/epoxy composites (CFEC). A light source simulating nuclear explosion's light radiation was built to irradiate the CFEC, then measure the reflection spectrum and temperature of samples.
View Article and Find Full Text PDFMicrowave-assisted extraction of dandelion root polysaccharides: Extraction process optimization, purification, structural characterization, and analysis of antioxidant activity.
Int J Biol Macromol
January 2025
College of Food and Bioengineering, Qiqihar University, Qiqihar 161006, PR China; Engineering Research Center of Plant Food Processing Technology, Ministry of Education, Qiqihar 161006, PR China. Electronic address:
This study aimed to establish a microwave-assisted method (MAE) for the efficient extraction of polysaccharides from dandelion roots. This study investigated the molecular structure and bioactivity of the polysaccharides from dandelion roots. Extraction conditions were optimized using response surface methodology (RSM).
View Article and Find Full Text PDFAnalysis Method of 131I Activity in Carbon Cartridge and Internal Dose Assessment for Nuclear Medicine Workers.
Health Phys
January 2025
National Institute for Radiological Protection, Chinese Center for Disease Control and Prevention, Beijing, 100088, China.
Inhalation of 131I is the main route for internal doses to nuclear medicine workers. This study aimed to establish a simple analysis method for determining 131I activity in carbon cartridges, explore the activity concentration of 131I in nuclear medicine departments, and evaluate the internal dose of workers. A total of 21 nuclear medicine departments in the hospital conducted air sampling using a high-volume air sampler equipped with carbon cartridges and glass fiber filters to collect gaseous 131I and aerosol 131I, respectively.
View Article and Find Full Text PDFRecyclable Millable PolyureThane based on Enaminone Bonds With Upcycled Mechanical Performance.
Macromol Rapid Commun
January 2025
State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing, 100029, China.
Thermoplastic polyurethane (TPU) exhibits re-processable properties, but the properties of TPU is deteriorated during the reprocessing for the oxidation and degradation of polymer chains. Meanwhile, although thermoset polyurethane exhibits excellent mechanical properties, it cannot be recycled for permanent crosslinking. Hence, it's still a challenge to obtain PU which exhibits the balance between the recyclability and mechanical properties.
View Article and Find Full Text PDFCattail (), a wetland plant, is emerging as a sustainable materials resource. While most of the species are proven to be a fiber-yielding crop, exhibits the broadest leaf size (5-30 mm), yields highest amount of fiber (≈190.9 g), and captures maximum CO (≈1270 g).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!