For operation as power amplifiers in RF applications, high electron mobility transistor (HEMT) structures are subjected to a range of bias conditions, applied at both the gate and drain terminals, as the device is biased from the OFF- to ON-state conditions. The stability of the device threshold voltage (V) condition is imperative from a circuit-design perspective and is the focus of this study, where stresses in both the ON and OFF states are explored. We see rapid positive threshold voltage increases under negative bias stress and subsequent recovery (i.e., V reduces), whereas conversely, we see a negative V shift under positive stress and V increase during the subsequent relaxation phase. These effects are correlated with the thickness of the GaN layer and ultimately result from the deep carbon-acceptor levels in the C-GaN back barrier incorporated to screen the buffer between the silicon substrate and the epitaxially grown GaN layer. Methods to mitigate this effect are explored, and the consequences are discussed.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11356376PMC
http://dx.doi.org/10.3390/mi15080951DOI Listing

Publication Analysis

Top Keywords

hemt structures
8
power amplifiers
8
threshold voltage
8
gan layer
8
charge trapping
4
trapping emission
4
emission bias
4
bias temperature
4
temperature stressing
4
stressing schottky
4

Similar Publications

Owing to its high spatial resolution and its high sensitivity to chemical element detection, transmission electron microscopy (TEM) technique enables to address high-level materials characterization of advanced technologies in the microelectronics field. TEM instruments fitted with various techniques are well-suited for assessing the local structural and chemical order of specific details. Among these techniques, 4D-STEM is suitable to estimate the strain distribution of a large field of view.

View Article and Find Full Text PDF

Thick metamorphic buffers are considered indispensable for III-V semiconductor heteroepitaxy on large lattice and thermal-expansion mismatched silicon substrates. However, III-nitride buffers in conventional GaN-on-Si high electron mobility transistors (HEMT) impose a substantial thermal resistance, deteriorating device efficiency and lifetime by throttling heat extraction. To circumvent this, a systematic methodology for the direct growth of GaN after the AlN nucleation layer on six-inch silicon substrates is demonstrated using metal-organic vapor phase epitaxy (MOVPE).

View Article and Find Full Text PDF

GaN-on-Si high-electron-mobility transistors have emerged as the next generation of high-powered and cost-effective microwave devices; however, the limited thermal conductivity of the Si substrate prevents the realization of their potential. In this paper, a GaN-on-insulator (GNOI) structure is proposed to enhance the heat dissipation ability of a GaN-on-Si HEMT. Electrothermal simulation was carried out to analyze the thermal performance of the GNOI-on-Si HEMTs with different insulator dielectrics, including SiO, SiC, AlN, and diamond.

View Article and Find Full Text PDF

750 V Breakdown in GaN Buffer on 200 mm SOI Substrates Using Reverse-Stepped Superlattice Layers.

Micromachines (Basel)

November 2024

Guangzhou Wide Bandgap Semiconductor Innovation Center, Guangzhou Institute of Technology, Xidian University, Guangzhou 510555, China.

In this work, we demonstrated the epitaxial growth of a gallium nitride (GaN) buffer structure on 200 mm SOI (silicon-on-insulator) substrates. This epitaxial layer is grown using a reversed stepped superlattice buffer (RSSL), which is composed of two superlattice (SL) layers with different Al component ratios stacked in reverse order. The upper layer, with a higher Al component ratio, introduces tensile stress instead of accumulative compressive stress and reduces the in situ curvature of the wafer, thereby achieving a well-controlled wafer bow ≤ ±50 µm for a 3.

View Article and Find Full Text PDF

We experimentally investigated the asymmetric dual-grating-gate plasmonic terahertz (THz) detector based on an InGaAs-channel high-electron-mobility transistor (HEMT) in the gate-readout configuration. Throughout the THz pulse detection measurement on the fabricated device, we discovered a new detection mechanism called the "3D rectification effect" at the positive gate bias application, which is a cooperative effect of the plasmonic nonlinearities in the channel with the diode nonlinearity in the heterobarrier between the InGaAs channel layer and the InAlAs spacer/carrier-supply/barrier layers, resulting in a giant enhancement of the detector responsivity. We also found that an undesired long-tail waveform observed on the temporal pulse photoresponse of the device is due to trapping of carriers to the donor levels in the silicon -doped carrier-supply layer when they tunnel through the barrier to the gate and can be eliminated completely by introducing the so-called inverted-HEMT structure.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!