Objectives: The purpose of this study was to evaluate the accuracy and cost-effectiveness of the dental models 3D printed in vertical and horizontal orientation as compared to the conventional plaster and digital models.
Methods: This study involved scanning 50 plaster models using Maestro 3D Desktop Scanner (AGE Solutions, Pisa, Italy). The STL file obtained from the scanner was processed and three-dimensionally (3D) printed in the horizontal and vertical orientation using a PolyJet 3D printer (Objet 30 prime, Stratasys Ltd., Eden Prairie, Minnesota, United States). The accuracy of the rapid-prototyped (3D printed) models was measured from the pre-determined landmarks and was compared among the groups. In addition, determining the cost-effectiveness of the 3D printed models in different orientations was based on the amount of material (resin) utilized during the 3D printing process. ANOVA was used to determine the accuracy of the models.
Results: There were statistically insignificant differences (P>0.05) among rapid-prototyped models (≤0.06mm) compared to plaster models and digital models for the linear measurements made in all three planes of space. The dental models printed in the horizontal orientation were found to be more cost-effective than those printed in a vertical orientation in terms of the amount of material (resin) utilized and printing time during the 3D printing process.
Conclusions: The accuracy of rapid-prototyped models 3D printed in the horizontal and vertical orientations was comparable to the plaster models and digital models for clinical applications. Horizontally printed models were more cost-effective than vertically printed models.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.ortho.2024.100902 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Vesalius and His Manikin: An Enduring Influence on Modern Anatomic Teaching.
Neurosurgery
February 2025
The Loyal and Edith Davis Neurosurgical Research Laboratory, Department of Neurosurgery, Barrow Neurological Institute, St. Joseph's Hospital and Medical Center, Phoenix , Arizona , USA.
Anatomic teaching has long informed surgical knowledge, experience, and skills. One tool for teaching that emerged during the Renaissance was the fugitive anatomic sheet, which used flap layers to reveal different levels of anatomy. In 1538, Vogtherr introduced the first fugitive sheets, which included illustrations of male and female figures with a torso paper flap that, when lifted, revealed the internal organs in a cartoonish style.
View Article and Find Full Text PDFEvaluating the value of 3D-printed bone models with fracture fragments connected by flexible rods for training and preoperative planning.
3D Print Med
January 2025
AO Innovation Translation Center (AO ITC), AO Foundation, Davos, Switzerland.
Background: The emergence of 3D printing has revolutionized medical training and preoperative planning. However, existing models have limitations, prompting the development of newly designed flexible 3D-printed bone fracture models.
Methods: The designed flexible 3D-printed bone fracture models were evaluated by 133 trauma surgeons with different levels of experience for perceived value as educational tool or as preoperative planning tool.
Next-Generation Point-of-Care Diagnostics: Silver Nanoparticle-Enhanced 3D-Printed Multiplex Electrochemical Biosensor for Detecting Dengue and Chikungunya Viruses.
ACS Appl Bio Mater
January 2025
Department of Biotechnology, School of Chemical and Life Sciences, Jamia Hamdard, Hamdard Nagar, New Delhi 110062, India.
In recent years, the increasing prevalence of viral infections such as dengue (DENV) and chikungunya (CHIKV) has emphasized the vital need for new diagnostic techniques that are not only quick and inexpensive but also suitable for point-of-care and home usage. Existing diagnostic procedures, while useful, sometimes have limits in terms of speed, mobility, and price, particularly in resource-constrained environments and during epidemics. To address these issues, this study proposes a novel technique that combines 3D printing technology with electrochemical biosensors to provide a highly sensitive, user-friendly, and customizable diagnostic platform.
View Article and Find Full Text PDF3D Printed Titanium Scaffolds with Bi-Directional Gradient QK-Functionalized Surface.
Adv Mater
January 2025
National Engineering Research Center for Tissue Restoration and Reconstruction, South China University of Technology, Guangzhou, 510006, China.
3D printed titanium scaffold has promising applications in orthopedics. However, the bioinert titanium presents challenges for promoting vascularization and tissue growth within the porous scaffold for stable osteointegration. In this study, a modular porous titanium scaffold is created using 3D printing and a gradient-surface strategy to immobilize QK peptide on the surface with a bi-directional gradient distribution.
View Article and Find Full Text PDFRobustness of machine learning predictions for Fe-Co-Ni alloys prepared by various synthesis methods.
iScience
January 2025
School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore.
Developing high-performance alloys is essential for applications in advanced electromagnetic energy conversion devices. In this study, we assess Fe-Co-Ni alloy compositions identified in our previous work through a machine learning (ML) framework, which used both multi-property ML models and multi-objective Bayesian optimization to design compositions with predicted high values of saturation magnetization, Curie temperature, and Vickers hardness. Experimental validation was conducted on two promising compositions synthesized using three different methods: arc melting, ball milling followed by spark plasma sintering (SPS), and chemical synthesis followed by SPS.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!