Evaluation of reduced graphene oxide from cotton waste as an efficient phenol adsorbent in aqueous media.

The elimination of organic substances, such as phenol, in conventional and biological processes, has been considered a challenge for the petroleum industry. In this work, reduced graphene oxide (rGO), obtained from cellulosic biomass (CB-rGO), as cotton waste, was employed as a phenol adsorbent in an aqueous solution simulating refinery effluent. The CB-rGO was characterized using HRTEM, Raman, XRD, FTIR, BET, and zeta analysis. The behavior of variables such as pH, contact time, temperature, CB-rGO mass, and adsorbate concentration on the characteristics of the adsorption process were continuously investigated. These parameters of the adsorption process were evaluated across a range of adsorbent concentrations from 100 to 300 mg/L, pH in the range of 2-11, adsorbent mass 5-25 mg, contact time of 0-180 min, and temperature of 20-60 °C. The adsorption isotherm data were better described by the Freundlich equation compared to the Langmuir and Sips models, despite the small difference in R values. Mechanism diffusion was analyzed using the Boyd model and confirmed to be the rate-limiting step in the adsorption process. The endothermic nature of this CB-rGO adsorption process with phenol was confirmed by verifying the thermodynamic data. This successful removal of phenol from synthetic effluents highlights the promising potential of this adsorbent obtained from an industrial residue and being an ecologically more sustainable alternative compared to the synthesis of other materials identified to remove this contaminant.