Rechargeable secondary batteries, widely used in modern technology, are essential for mobile and consumer electronic devices and energy storage applications. Lithium (Li)-ion batteries are currently the most popular choice due to their decent energy density. However, the increasing demand for higher energy density has led to the development of Li metal batteries (LMBs). Despite their potential, the commonly used liquid electrolyte-based LMBs present serious safety concerns, such as dendrite growth and the risk of fire and explosion. To address these issues, using solid-state electrolytes in batteries has emerged as a promising solution. In this Perspective, recent advancements are discussed in ionic covalent organic framework (ICOFs)-based solid-state electrolytes, identify current challenges in the field, and propose future research directions. Highly crystalline ion conductors with polymeric versatility show promise as the next-generation solid-state electrolytes. Specifically, the use of anionic or cationic COFs is examined for Li-based batteries, highlight the high interfacial resistance caused by the intrinsic brittleness of crystalline ICOFs as the main limitation, and presents innovative ideas for developing all- and quasi-solid-state batteries using ICOF-based solid-state electrolytes. With these considerations and further developments, the potential for ICOFs is optimistic about enabling the realization of high-energy-density all-solid-state LMBs.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/adma.202407761 | DOI Listing |
Gels
December 2024
School of Chemistry and Materials Science, Guangdong University of Education, Guangzhou 510303, China.
Compared to traditional liquid electrolytes, solid electrolytes have received widespread attention due to their higher safety. In this work, a vinyl functionalized metal-organic framework porous material (MIL-101(Cr)-NH-Met, noted as MCN-M) is synthesized by postsynthetic modification. A novel three-dimensional hybrid gel composite solid electrolyte (GCSE-P/MCN-M) is successfully prepared via in situ gel reaction of a mixture containing multifunctional hybrid crosslinker (MCN-M), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), ethylene carbonate (EC), diethylene glycol monomethyl ether methacrylate (EGM) and polyethylene (vinylidene fluoridee) (PVDF).
View Article and Find Full Text PDFGels
December 2024
Quantum Technologies Research Center, Science and Research Branch, Islamic, Azad University, Tehran 1477893855, Iran.
Flexible solid-state-based supercapacitors are in demand for the soft components used in electronics. The increased attention paid toward solid-state electrolytes could be due to their advantages, including no leakage, special separators, and improved safety. Gel polymer electrolytes (GPEs) are preferred in the energy storage field, likely owing to their safety, lack of leakage, and compatibility with various separators as well as their higher ionic conductivity (IC) than traditional solid electrolytes.
View Article and Find Full Text PDFACS Appl Mater Interfaces
December 2024
Tianjin Key Laboratory for Photoelectric Materials and Devices, School of Materials Science and Engineering, Tianjin University of Technology, Tianjin 300384, P.R. China.
Beta-AlO-based solid-state sodium metal batteries are some of the best options for large-scale energy storage systems because of their high energy density, high-level safety, and low cost. Nevertheless, their room-/low-temperature operation remains challenging due to low ionic conductivity of Beta-AlO electrolyte and weak solid-solid contact of the Na/Beta-AlO interface. Herein, an integrated strategy was developed via electrolyte optimization and interface regulation, in which Cu as a stabilizing agent was incorporated into Beta-AlO to improve density and ionic conductivity and the InS interface layer was introduced between the Na anode and solid electrolyte to induce the in situ formation of a mixed conductive layer (Na-In alloy and NaS).
View Article and Find Full Text PDFACS Appl Mater Interfaces
December 2024
Advanced Functional Nanomaterials Research Laboratory, Centre for Nanoscience and Technology, Madanjeet School of Green Energy Technologies, Pondicherry University (A Central University), Dr. R. Venkataraman Nagar, Kalapet, Puducherry 605014, India.
The development of quasi-solid-state lithium metal batteries (QSSLMBs) is hindered by inadequate interfacial contact, poor wettability between electrodes and quasi-solid-state electrolytes, and significant volume changes during long-term cycling, leading to safety risks and cataclysmic failures. Here, we report an innovative approach to enhance interfacial properties through the construction of QSSLMBs. A multilayer design integrates a microwave-synthesized LiAlTi(PO) (LATP) ceramic electrolyte, which is surface-coated with a lithiophilic conductive ink comprising VS and disulfonated functionalized graphene nanosheets (VS-DSGNS) using a low-cost nail-polish binder.
View Article and Find Full Text PDFAdv Mater
December 2024
Eastern Institute for Advanced Study, Eastern Institute of Technology, Ningbo, 315200, China.
All-solid-state batteries (ASSBs) are regarded as promising next-generation energy storage technology owing to their inherent safety and high theoretical energy density. However, achieving and maintaining solid-solid electronic and ionic contact in ASSBs generally requires high-pressure fabrication and high-pressure operation, posing substantial challenges for large-scale production and application. In recent years, significant efforts are made to address these pressure-related challenges.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!