In this paper, the solid solution and precipitation behavior of inclusions on the surface and 1/2 thickness of the tested steel plate under the condition of welding heat input of 400 kJ/cm is investigated by using laser confocal experiments with hot-rolled state DH36 ship plate steel as the research object, and the mechanism of the effect of inclusions on the phase transformation of an acicular ferrite is revealed. The results show that the inclusions of the tested steel are mainly composed of Oxide-MnS, MnS, Oxide, TiN, Spinel, etc. The amount of inclusions on the surface of the tested steel plate is significantly higher than that at the 1/2 thickness position. During the heating stage, the small inclusions on the surface immediately disappeared, and the large inclusions gradually solidified in the matrix; atomic diffusion occurred at the bond between the inclusions and the matrix; while the small inclusions at the 1/2 thickness position gradually disappeared at the beginning of the heating stage, and the inclusions began to precipitate and grow when the temperature was increased to 990 °C. The acicular ferrite preferentially nucleates and grows near the boundary of the inclusions during the post-weld cooling stage, and its growth ends when two acicular ferrites cross.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11324875PMC
http://dx.doi.org/10.1038/s41598-024-69907-1DOI Listing

Publication Analysis

Top Keywords

inclusions surface
12
1/2 thickness
12
tested steel
12
inclusions
10
ship plate
8
plate steel
8
heat input
8
steel plate
8
acicular ferrite
8
thickness position
8

Similar Publications

Energizing Robust Sulfur/Lithium Electrochemistry via Nanoscale-Asymmetric-Size Synergism.

J Am Chem Soc

January 2025

State Key Laboratory of Physical Chemistry of Solid Surface, Fujian Key Laboratory of Surface and Interface Engineering for High Performance Materials, College of Materials, Xiamen University, Xiamen 361005, China.

Sluggish redox kinetics and dendrite growth perplex the fulfillment of efficient electrochemistry in lithium-sulfur (Li-S) batteries. The complicated sulfur phase transformation and sulfur/lithium diversity kinetics necessitate an all-inclusive approach in catalyst design. Herein, a compatible mediator with nanoscale-asymmetric-size configuration by integrating Co single atoms and defective CoTe (Co-CoTe@NHCF) is elaborately developed for regulating sulfur/lithium electrochemistry synchronously.

View Article and Find Full Text PDF

During the harvest of Ilex paraguariensis, approximately 2-5 tons per hectare of thick stems are left on the soil surface. The outer portion of these stems, referred to as the coproduct, constitutes 30% of the total residue mass. Although this coproduct has been partially characterized in terms of its phytochemical profile, its technological applications remain unexplored.

View Article and Find Full Text PDF

A man in his early 40s presented with extensive skin lesions in the groin and genital regions. The lesions were erythematous and maculopapular but evolved into vesicles and pustules with surrounding cellulitis. He stated that he grips livestock between his legs for sheep shearing.

View Article and Find Full Text PDF

This study aimed to develop bead-free nanofibers for effective omega-3 encapsulation using optimal mixing ratios of whey protein isolate (WPI)/polyvinyl alcohol (PVA) blends via electrospinning method. Various WPI-PVA ratios (100:0, 90:10, 80:20, 70:30, 60:40, 50:50 v/v) were examined for surface tension, viscosity, and conductivity. SEM images revealed uneven nanofibers with bead at 90:10 and 80:20 ratios, while the 70:30 ratio produced uniform and bead-free nanofibers with an average diameter of 262.

View Article and Find Full Text PDF

In this study, composite films were developed by encapsulating cassia oil (CO) with β-cyclodextrin through a microencapsulation technique and incorporating it into a chitosan (CS), polyvinyl alcohol (PVA) and glycerol matrix. The primary objective of the film was to inhibit bacterial growth on the surface of fresh bananas and extend their shelf life. Characterization methods were employed to evaluate the physical properties and functionality of the composite films.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!