In this study, the effect of boric acid (HBO) on fiber-reinforced layered composites was investigated. Glass fiber-reinforced epoxy composites were used, and the effects of boric acid on thermal and mechanical properties were investigated. For this purpose, composite plates were manufactured by adding boric acid (BA) to the epoxy in different ratios (0, 0.5, 1, and 1.5% by weight). Tensile tests, compression tests, and shear tests were performed to determine the mechanical properties of these plates, and DSC, TGA, and DMA analyses were performed to determine their thermal properties. SEM and EDS analyses were performed on the specimens to examine their morphologies. Furthermore, examinations were conducted on how BA affected the specimens' failure behavior. In the study, it was found that, except for the compressive strength, the mechanical properties were improved by the added BA. The highest tensile strength, shear strength, modulus of elasticity, shear modulus, and Poisson's ratio were obtained from 0.5% BA-added specimens and were 24.78%, 8.75%, 25.13%, 11.24%, and 12.5% higher than the values obtained from 0% BA-added specimens, respectively. The highest loss and storage modulus were obtained from 0% and 0.5% BA-added specimens, respectively. The specimens' glass transition temperatures were decreased by the addition of BA; the specimen with a 1% addition of BA had the lowest value. Furthermore, interlayer delamination and fiber/matrix failure were observed in all BA-added specimens.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11313932 | PMC |
| http://dx.doi.org/10.3390/polym16152133 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fluorescent distinguishing flavonoid glycosides against aglycones based on the selective recognization of boric acid-functional Eu(III)-organic framework.
Talanta
January 2025
State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, Jilin, 130022, China. Electronic address:
Flavonoid glycosides are formed by dehydration condensation of aglycones and sugar molecules. Therefore, discrimination of flavonoid glycosides from their corresponding aglycones is a challenging task because they contain the same aglycone part in their molecular structures. Herein, boric acid-functional Eu(III)-organic framework (BA-Eu-MOF) was applied to discriminate flavonoid glycosides including baicalin (Bai), wogonoside (Wog), rutin (Rut), puerarin (Pue), quercitrin (Que) and astragalin (Ast) from their corresponding aglycones for the first time.
View Article and Find Full Text PDFMolecular Weight-Dependent Boron Release Effect in PVA/Chitosan Cryogels and In Vitro Mineralization Evaluations by Osteoblast Cells.
Biopolymers
January 2025
School of Pharmacy and Bioengineering, Keele University, Keele, UK.
Cryogels were fabricated by combining polyvinyl alcohol (PVA) and chitosan of varying molecular weights (Mw). In this study, the effects of chitosan Mw, types of boron-containing molecules on network formation, and boron release rate in resulted cryogels were investigated. The PVA/chitosan blend maintained a constant 4.
View Article and Find Full Text PDFPreparation of bio-based flame retardants by modification of cottonseed meal with polyphosphate and boric acid and its durability to cotton fiber.
Int J Biol Macromol
January 2025
College of Chemistry Engineering and Materials Science, Tianjin University of Science and Technology, Tianjin 300457, China.
The durability and flame retardancy of cotton fabrics have been the focus of long-term research. In this paper, a method for preparing flame retardants through the direct modification of biomass was proposed, and the durable flame retardant of homologous cottonseed meal modified biomass flame retardants for cotton fabrics was achieved through biomass composition analysis and modeling. In this study, a cottonseed meal-phosphoric acid-boric acid synergistic bio-based flame retardant (CPB) was synthesized and characterized.
View Article and Find Full Text PDFA highly stretchable, self-healing, self-adhesive polyacrylic acid/chitosan multifunctional composite hydrogel for flexible strain sensors.
Carbohydr Polym
March 2025
State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, 15 North Third Ring Road East, Chaoyang District, Beijing 100029, China. Electronic address:
Conductive hydrogels have emerged as excellent candidates for the design and construction of flexible wearable sensors and have attracted great attention in the field of wearable sensors. However, there are still serious challenges to integrating high stretchability, self-healing, self-adhesion, excellent sensing properties, and good biocompatibility into hydrogel wearable devices through easy and green strategies. In this paper, multifunctional conductive hydrogels (PCGB) with good biocompatibility, high tensile (1694 % strain), self-adhesive, and self-healing properties were fabricated by incorporating boric acid (BA) and glucose (Glu) simultaneously into polyacrylic acid (PAA) and chitosan (CS) polymer networks using a simple one-pot polymerization method.
View Article and Find Full Text PDFFluconazole-Resistant Vulvovaginal Candidosis: An Update on Current Management.
Pharmaceutics
December 2024
Femicare, Clinical Research for Women, 3300 Tienen, Belgium.
Currently, the rising prevalence of resistant species, particularly , as well as non-albicans isolates such as and , represent challenges in their management. In this review, we aimed to explore the current management of fluconazole-resistant vulvovaginal candidiasis (FRVVC). Identified studies focused on alternative antifungal therapies, including boric acid, nystatin, and newer agents like oteseconazole and ibrexafungerp.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!