Thermochromic phase change materials (TPCMs) are gaining increasing interest among scientists. These multifunctional materials can store thermal energy but also, at the same time, during the phase transition, they can change colour. Thermal conductivity is also extremely important for this type of material, which is why various additives are used for this purpose. This work aimed to study the properties of thermochromic phase change materials with an inorganic modifier. Stearic acid, behenyl alcohol, and bromocresol purple were used as thermochromic system components, while boron nitride particles were used as an additive. The key tests for such systems are thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), which allow determining the thermal stability of the materials (at around 170 °C) and phase transition parameters (thermal energy storage of 300 J/g in the range of 40-75 °C). The thermochromic properties were tested, and satisfactory results were obtained. In the end, laser flash analysis (LFA) tests indicated that boron nitride improves the thermal conductivity of the organic thermochromic phase change material by almost 30%. The results showed that the tested materials have great potential as thermochromic phase change materials for thermal energy storage.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11312816 | PMC |
| http://dx.doi.org/10.3390/ma17153632 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Cellulose-based hydrogel simultaneously possessing solar and evaporative cooling performances for energy-saving window and personal thermal management.
Carbohydr Polym
March 2025
State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116024, China. Electronic address:
Thermochromic smart windows have been widely developed for building energy saving. However, most smart windows suffer from limited energy-saving performance, fixed phase transition temperature, and are not suitable for the temperature regulation needs of different application scenarios. Herein, a unique self-adaptive thermochromic hydrogel (HBPEC-PNA) with self-moisture-absorbing performance is reported that assembles solar energy cooling and evaporative heat dissipation.
View Article and Find Full Text PDFMinute-Level Room-Temperature Switching and Long Cycle Stability of Thermochromic Inorganic Perovskite Smart Windows.
Adv Mater
January 2025
School of Energy and Power Engineering, Beihang University, Beijing, 100191, China.
Perovskite smart windows (PSWs) are widely investigated owing to excellent thermochromic properties, while restricted by poor transition performance and cycle stability. Herein, dimethyl sulfoxide vapor is utilized as an induction reagent for rapid reversible switching at room temperature between the colored and bleached phases. To obtain PSWs with different optical properties and transition performance, red CsPbIBr, yellow RbCsPbIBr and brown CsSnPbIBr are prepared through alloying.
View Article and Find Full Text PDFTwo thermochromic laminated veneer cellulose-based alizarin/stearic acid/nano‑silicon dioxide/hexagonal boron nitride composites encapsulated with xanthan gum and wood wax oil films, that have excellent temperature-responsive and thermal-storing capabilities.
Int J Biol Macromol
January 2025
Central South University of Forestry and Technology, Shaoshan South Road 498, Changsha 410004, China. Electronic address:
Thermochromic wood-based phase change material (TWPCM) is a temperature-responsive, smart material that actively manages thermal energy in response to ambient temperature fluctuations. The material has become a central focus in research on thermal energy storage and temperature sensing in recent years. A key research direction is the incorporation of delignified veneer impregnated with thermochromic phase change material (TPCM) into a multi-layered structure to enhance the thermal energy storage capacity of TWPCM.
View Article and Find Full Text PDFNovel technique to produce porous thermochromic VO nanoparticle films using gas aggregation source.
Sci Rep
January 2025
Department of Macromolecular Physics, Faculty of Mathematics and Physics, Charles University, V Holešovičkách 2, 180 00, Prague 8, Czech Republic.
Vanadium dioxide (VO) is a phase transition material that undergoes semiconductor-to-metal transition at the temperature of about 68 °C. This extraordinary feature triggered intensive research focused on the controlled synthesis of VO. In this study, we introduce and investigate an original linker- and solvent-free strategy enabling the production of highly porous VO nanoparticle-based films.
View Article and Find Full Text PDFStretchable Thermochromic Fluorescent Fibers Based on Self-Crystallinity Phase Change for Smart Wearable Displays.
Polymers (Basel)
December 2024
Engineering Research Center of Technical Textiles, Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, China.
Smart fibers with tunable luminescence properties, as a new form of visual output, present the potential to revolutionize personal living habits in the future and are receiving more and more attention. However, a huge challenge of smart fibers as wearable materials is their stretching capability for seamless integration with the human body. Herein, stretchable thermochromic fluorescent fibers are prepared based on self-crystallinity phase change, using elastic polyurethane (PU) as the fiber matrix, to meet the dynamic requirements of the human body.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!