This study assess how well diclofenac (DCF) can be separated from aqueous solution using potassium permanganate-modified eggshell biosorbent (MEB). The MEB produced was characterised using XRD, FTIR, and SEM. Batch experiments were conducted to examine and assess the impact of contact time, adsorbent dosage, initial concentration, and temperature on the adsorption capacity of the MEB in the DCF sequestration. The best parameters to obtained 95.64% DCF removal from liquid environment were 0.05 g MEB weight, 50 mg/L initial concentration, and 60 min contact time at room temperature. The maximum DCF sequestration capacity was found to be 159.57 mg/g with 0.05 g of MEB at 298 K. The adsorption isotherm data were more accurately predicted by the Freundlich model, indicating a process of heterogeneous multilayer adsorption. The results of the kinetic study indicated that the pseudo-second-order kinetic models best matched the experimental data. The findings revealed that the dynamic of DCF entrapment is largely chemisorption and diffusion controlled. Based on the values of thermodynamic parameters, the process is both spontaneous and endothermic. The primary processes of DCF sorption mechanism onto the MEB were chemical surface complexation, hydrogen bonding, π-π stacking, and electrostatic interactions. The produced MEB showed effective DCF separation from the aqueous solution and continued to have maximal adsorption capability even after five regeneration cycles. These findings suggest that MEB could be highly efficient adsorbent for the removal of DCF from pharmaceutical wastewater.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1007/s10661-024-12964-w | DOI Listing |
Environ Monit Assess
August 2024
Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Negeri Padang, Sumatera Barat, Indonesia.
This study assess how well diclofenac (DCF) can be separated from aqueous solution using potassium permanganate-modified eggshell biosorbent (MEB). The MEB produced was characterised using XRD, FTIR, and SEM. Batch experiments were conducted to examine and assess the impact of contact time, adsorbent dosage, initial concentration, and temperature on the adsorption capacity of the MEB in the DCF sequestration.
View Article and Find Full Text PDFHuan Jing Ke Xue
June 2023
College of Environmental Science and Engineering, Guilin University of Technology, Guilin 541006, China.
In this study, coconut shell biochar modified by KMnO (MCBC) was used as the adsorbent, and its removal performance and mechanism for Cd(Ⅱ) and Ni(Ⅱ) were discussed. When the initial pH and MCBC dosage were separately 5 and 3.0 g·L, respectively, the removal efficiencies of Cd(Ⅱ) and Ni(Ⅱ) were both higher than 99%.
View Article and Find Full Text PDFHuan Jing Ke Xue
November 2021
Guangxi Key Laboratory of Environmental Pollution Control Theory and Technology, College of Environmental Science and Engineering, Guilin University of Technology, Guilin 541006, China.
Eucalyptus biochar(BC) was prepared and potassium permanganate was used to modify the biochar(KBC). Static adsorption experiments on Pb(Ⅱ) in aqueous solution were carried out to investigate the effects of pH, adsorbent dosing, adsorption time, temperature, and initial concentration on the adsorption of Pb(Ⅱ). The results showed that the optimum pH was 5 while the adsorption reached saturation after 6 h.
View Article and Find Full Text PDFChemosphere
December 2018
U.S. Environmental Protection Agency, National Risk Management Research Laboratory, Ground Water and Ecosystems Restoration Division, Ada, OK, United States.
In this study, the removal efficiency PAHs by chemical oxidation combined with microbe remediation was evaluated in two contaminated soils. The number of indigenous soil microbes decreased after the addition of chemical oxidants and then increased by nutrients addition. The total removal efficiencies of PAHs by chemical oxidation and nutrient addition followed the order: activated persulfate > potassium permanganate > modified Fenton reagent > Fenton reagent.
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
March 2018
Laboratory of Organometallics, Catalysis, and Ordered Materials, State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, People's Republic of China.
In this work, a KMnO-modified-biochar-based composite material with manganese oxide produced at 600 °C was fabricated to investigate the sorption mechanism of Cd(II) and to comprehensively evaluate the effect of the modification on biochar properties. Cd(II) adsorption mechanisms were mainly controlled by interaction with minerals, complexation with oxygen-containing functional groups, and cation-π interaction. The sorption capacity was significantly reduced after a deash treatment of biochar, almost shrunk by 3 and 3.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!