As a key device for solar energy conversion, solar absorbers play a critical role in improving the operating temperature of concentrated solar power (CSP) systems. However, solar absorbers with high spectral selectivity and good thermal stability at high temperatures in air are still scarce. This study presents a novel surface reconstruction strategy to improve the spectral selectivity of LaSrCoO (LSC5) for enhanced CSP application. The strategy could efficiently enhance the solar absorptance due to the existence of a high-absorption thin layer composed of nanoparticles on the LSC5 surface. Meanwhile, the crystal facet with low emittance on the LSC5 surface was exposed. Thus, the LSC5 that underwent surface reconstruction achieved a higher solar absorptance (∼0.75) and lower infrared emittance (∼0.19) compared to the original LSC5 (0.63/0.21), representing an improvement of nearly 32%. Additionally, the surface reconstructed LSC5 demonstrated a lower infrared thermographic temperature and a higher solar-thermal conversion equilibrium temperature compared to those of LSC5 and SiC. Moreover, the reconstructed LSC5 could maintain stable performance up to 800 °C in air, which might simplify the complexity of the CSP systems. The surface reconstruction strategy provided a new method to optimize the spectral selectivity of high-temperature stable ceramics, contributing to advancements in solar energy conversion technologies.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsami.4c08651 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Development of a Deep Learning-Based Model for Pressure Injury Surface Assessment.
J Clin Nurs
January 2025
School of Nursing, Jinan University, Guangzhou, Guangdong, China.
Aim: To develop a deep learning-based smart assessment model for pressure injury surface.
Design: Exploratory analysis study.
Methods: Pressure injury images from four Guangzhou hospitals were labelled and used to train a neural network model.
XIS-Temperature: A daily spatiotemporal machine-learning model for air temperature in the contiguous United States.
Environ Res
January 2025
Department of Environmental Medicine and Public Health, Icahn School of Medicine at Mount Sinai, New York, NY, USA; The Department of Geography and Environmental Development, Ben-Gurion University of the Negev, Beer Sheva, Israel.
The challenge of reconstructing air temperature for environmental applications is to accurately estimate past exposures even where monitoring is sparse. We present XGBoost-IDW Synthesis for air temperature (XIS-Temperature), a high-resolution machine-learning model for daily minimum, mean, and maximum air temperature, covering the contiguous US from 2003 through 2023. XIS uses remote sensing (land surface temperature and vegetation) along with a parsimonious set of additional predictors to make predictions at arbitrary points, allowing the estimation of address-level exposures.
View Article and Find Full Text PDFMangrove flourishing/deterioration under the control of the Indian Summer Monsoon over the past ∼3,195 years in Phang Nga Province, Thailand.
Mar Environ Res
January 2025
Key Laboratory of Marine Geology and Metallogeny, First Institute of Oceanography, Ministry of Natural Resources, Qingdao, 266061, China; Laboratory for Marine Geology, Qingdao Marine Science and Technology Center, Qingdao, 266237, China. Electronic address:
Mangrove wetlands are strategic locations for mitigating climate changes. In order to address the harm of rapid climate change to mangrove ecosystems, it is necessary to scientifically predict the fate of mangrove ecosystems, which can be achieved by reconstructing the development history of mangrove forests. This study analyzes the contribution of mangrove-derived organic matter (CMOM) from sediment core F in Phang Nga Province, Thailand by using the endmember mixing model based on stable organic carbon isotopes (δC) and C/N (molar) ratio.
View Article and Find Full Text PDFPhotoemission Study of GaN Passivation Layers and Band Alignment at GaInP(100) Heterointerfaces.
ACS Appl Mater Interfaces
January 2025
Grundlagen von Energiematerialien, Institut für Physik, Technische Universität Ilmenau, 98693 Ilmenau, Germany.
To date, III-V semiconductor-based tandem devices with GaInP top photoabsorbers show the highest solar-to-electricity or solar-to-fuel conversion efficiencies. In photoelectrochemical (PEC) cells, however, III-V semiconductors are sensitive, in terms of photochemical stability and, therefore, require suitable functional layers for electronic and chemical passivation. GaN films are discussed as promising options for this purpose.
View Article and Find Full Text PDFCu-Ni Oxidation Mechanism Unveiled: A Machine Learning-Accelerated First-Principles and TEM Study.
Nano Lett
January 2025
Department of Mechanical Engineering & Materials Science, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, United States.
The development of accurate methods for determining how alloy surfaces spontaneously restructure under reactive and corrosive environments is a key, long-standing, grand challenge in materials science. Using machine learning-accelerated density functional theory and rare-event methods, in conjunction with environmental transmission electron microscopy (ETEM), we examine the interplay between surface reconstructions and preferential segregation tendencies of CuNi(100) surfaces under oxidation conditions. Our modeling approach predicts that oxygen-induced Ni segregation in CuNi alloys favors Cu(100)-O c(2 × 2) reconstruction and destabilizes the Cu(100)-O (2√2 × √2)45° missing row reconstruction (MRR).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!