Background And Objectives: Surface roughness is one of the most important factors that play an important role in increasing the connection between the surface of the tooth and the applied restoration. Due to the increased interest in zirconia and the improvement of its mechanical and aesthetic properties, studies have increased that work to improve and increase its surface roughness so that it can be used as a veneer in the future. This study aims to compare the effect of two types of lasers on the surface of highly transparent zirconia to evaluate the surface roughness resulting from the two techniques.
Methodology: The study sample consisted of 20 ceramic cubes made of translucent zirconia (DD cubeX2, Dental Direct, Germany). It was made using a CAD-CAM Zircodenta device (Imes-Icore, Germany) and a zirconia sintering furnace (Imes-Icore, Germany). The study sample was divided into two groups; the first group consisted of 10 cubes exposed to Nd:YAG laser and the second group consisted of 10 discs exposed to continuous wave CO laser. The surface roughness test was conducted for the study samples in each of the groups using a surface roughness tester. Data were collected and analyzed using SPSS v25 software.
Results: The surface roughness was measured and its mean was 1.208±0.22 in the Nd:YAG laser group and 0.809±0.21 in the CO laser group. There was a significant difference between the study groups according to the independent sample T-test.
Conclusion: This study concluded that the Nd:YAG laser surface roughens of zirconia is greater than the continuous wave CO laser, with a substantially significant difference.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11301769 | PMC |
| http://dx.doi.org/10.7759/cureus.64009 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
The need for better metrics for floor-tile topography: Conventional metrics correlate only modestly with shoe-floor friction.
Tribol Int
May 2024
Department of Bioengineering, University of Pittsburgh, 3700 O'Hara St., Benedum Hall Room 302, Pittsburgh, PA 15261.
Roughness metrics measured with stylus profilometry are commonly used to explain a floor's friction performance, yet these metrics inconsistently predict shoe-floor friction. While strong correlations have been shown for systematically modified flooring, the goal of this study is to address a gap regarding the predictive ability of these metrics across heterogeneous porcelain flooring products. The predictive ability of four roughness metrics on oily friction performance was assessed using 23 floors and 4 shoe designs.
View Article and Find Full Text PDFAnchorable Polymers Enabling Ultra-Thin and Robust Hole-Transporting Layers for High-Efficiency Inverted Perovskite Solar Cells.
Angew Chem Int Ed Engl
January 2025
Key Laboratory for Advanced Materials and Joint International Research Laboratory of Precision Chemistry and Molecular Engineering, Shanghai Key Laboratory of Functional Materials Chemistry, Feringa Nobel Prize Scientist Joint Research Center, Frontiers Science Center for Materiobiology and Dynamic Chemistry, Institute of Fine Chemicals, School of Chemistry and Molecular Engineering, East China University of Science and Technology, Shanghai, China.
Currently, the development of polymeric hole-transporting materials (HTMs) lags behind that of small-molecule HTMs in inverted perovskite solar cells (PSCs). A critical challenge is that conventional polymeric HTMs are incapable of forming ultra-thin and conformal coatings like self-assembly monolayers (SAMs), especially for substrates with rough surface morphology. Herein, we address this challenge by designing anchorable polymeric HTMs (CP1 to CP5).
View Article and Find Full Text PDFMorphological Features Influence the Drug Loading and Delivery Efficacy of Photoactivatable Gold Nanocarriers for Antitumor Photo/Chemotherapy.
ACS Appl Mater Interfaces
January 2025
Institute of Optical Functional Materials for Biomedical Imaging, School of Chemistry and Pharmaceutical Engineering, Shandong First Medical University & Shandong Academy of Medical Science, Taian, Shandong 271016, PR China.
Photoactivatable gold nanocarriers are transforming antitumor therapies by leveraging their distinctive physicochemical properties, enabling targeted drug delivery and enhanced therapeutic efficacy in cancer treatment. This study systematically investigates how surface topography and morphology of gold nanocarriers influence drug loading capacity, light-to-heat conversion efficiency, and overall therapeutic performance in photo/chemotherapy. We synthesized four distinct morphologies of gold nanoparticles: porous gold nanocups (PAuNCs), porous gold nanospheres (PAuNSs), solid gold nanocups (SAuNCs), and solid gold nanospheres (SAuNSs).
View Article and Find Full Text PDFAntibacterial properties and biological activity of 3D-printed titanium alloy implants with a near-infrared photoresponsive surface.
Int J Implant Dent
January 2025
School of Stomatology, Zhejiang Chinese Medical University, Hangzhou, 310053, People's Republic of China.
Purpose: SLM 3D printing technology is one of the most widely used implant-making technologies. However, the surfaces of the implants are relatively rough, and bacteria can easily adhere to them; increasing the risk of postoperative infection. Therefore, we prepared a near-infrared photoresponsive nano-TiO coating on the surface of an SLM 3D-printed titanium alloy sheet (Ti6Al4V) via a hydrothermal method to evaluate its antibacterial properties and biocompatibility.
View Article and Find Full Text PDFAssessment of the chemical solubility of experimental and commercial lithium silicate glass-ceramics.
Dent Mater
January 2025
Department of Restorative Dentistry, University of Manitoba, Winnipeg, MB, R3E 0W2, Canada.
Objective: This study aimed to evaluate the chemical solubility (CS) and conduct a comprehensive physicochemical characterization of several experimental and commercial lithium silicate-based glass-ceramics towards an understanding of the chemical processes governing dissolution in these glass-ceramics.
Methodology: Glass-ceramic (GC) samples were categorized into two groups: experimental materials featuring lithium metasilicate crystals (GCE1 and GCE2); and five commercial brands relying mostly on lithium disilicate (Celtra®Duo, IPS e.max®CAD, Straumann®n!ce®, CEREC Tessera™, and VITA Suprinity®).
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!