Aim This study aims to evaluate the color stability of four provisional materials: polymethyl methacrylate (DPI® Self-Cure), 10-ethoxylated bisphenol A dimethacrylate (Oratemp® C&B), bis-acryl composite resin (Systemp® C&B, Ivoclar Vivadent), and bis-acryl composite (Systemp® C&B, Ivoclar Vivadent) combined with light-cure composite (Fusion Flo® LC). Materials and methods A total of 40 specimens were meticulously crafted from modeling wax into discs, each precisely 2 mm thick and 20 mm in diameter. Four provisional materials were packed into molds, yielding 10 specimens for each material group. After mixing and polymerization, the specimens were trimmed and polished. Reflectance spectrophotometers were used for initial color assessments based on the CIELAB color space system. Staining solutions, including coffee, Tata Green Tea, Pepsi, and turmeric, were prepared to mimic dietary agents. Artificial saliva, replicating oral conditions, was formulated and sterilized. The specimens were then immersed in various solutions for 15 days at 37 °C. Color measurements were taken on days 2 and 15 using the same spectrophotometer, calculating color differences (ΔE) from changes in L*, a*, and b* values. Results DPI Self-Cure (polymethyl methacrylate) was found to be the most color-stable temporary restorative material, followed by Vivadent (bis-acryl composite resin), Oratemp (10-ethoxylated bisphenol A dimethacrylate), and Fusion Flo (light-cure composite). Fusion Flo exhibited the highest color change by the 15th day. Coffee and green tea demonstrated the greatest potential for causing color changes in the provisional restorative materials. Conclusion DPI Self-Cure exhibited the highest color stability among the provisional materials, with Vivadent and Oratemp following closely behind. Green tea and coffee were the most potent staining agents, while Pepsi and turmeric induced lesser color changes.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11300175 | PMC |
http://dx.doi.org/10.7759/cureus.63941 | DOI Listing |
Nat Commun
December 2024
Department of Orthodontics, Peking University School and Hospital of Stomatology, Beijing, China.
The potential for mitigating intestinal inflammation through the gut-bone axis in the treatment of osteoporosis is significant. While various gut-derived postbiotics or bacterial metabolites have been created as dietary supplements to prevent or reverse bone loss, their efficacy and safety still need improvement. Herein, a colon-targeted drug delivery system is developed using surface engineering of polyvinyl butyrate nanoparticles by shellac resin to achieve sustained release of postbiotics butyric acid at the colorectal site.
View Article and Find Full Text PDFJACS Au
December 2024
Department of Chemical and Biomolecular Engineering, University of Delaware, Newark, Delaware DE 19716, United States.
Zeolite coatings are studied as molecular sieves for membrane separation, membrane reactors, and chemical sensor applications. They are also studied as anticorrosive films for metals and alloys, antimicrobial and hydrophobic films for heating, ventilation, and air conditioning, and dielectrics for semiconductor applications. Zeolite coatings are synthesized by hydrothermal, ionothermal, and dry-gel conversion approaches, which require high process temperatures and lengthy times (ranging from hours to days).
View Article and Find Full Text PDFNat Biomed Eng
December 2024
CAS Key Laboratory for Biomedical Effects of Nanomaterials and Nanosafety, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing, P. R. China.
The development of prophylactic cancer vaccines typically involves the selection of combinations of tumour-associated antigens, tumour-specific antigens and neoantigens. Here we show that membranes from induced pluripotent stem cells can serve as a tumour-antigen pool, and that a nanoparticle vaccine consisting of self-assembled commercial adjuvants wrapped by such membranes robustly stimulated innate immunity, evaded antigen-specific tolerance and activated B-cell and T-cell responses, which were mediated by epitopes from the abundant number of antigens shared between the membranes of tumour cells and pluripotent stem cells. In mice, the vaccine elicited systemic antitumour memory T-cell and B-cell responses as well as tumour-specific immune responses after a tumour challenge, and inhibited the progression of melanoma, colon cancer, breast cancer and post-operative lung metastases.
View Article and Find Full Text PDFJ Funct Biomater
November 2024
King Abdullah International Medical Research Center, Riyadh 11481, Saudi Arabia.
The aim of the study is to assess the impact of mechanical surface treatments on the shear bond strength (SBS) of orthodontic brackets bonded to three-dimensional (3D) printed and milled CAD/CAM provisional materials. Sixty cylindrical samples were fabricated for each provisional material. Samples were treated with one of the following surface treatments: aluminum oxide airborne particle abrasion, diamond bur rotary instrument roughening, and phosphoric acid etching (control).
View Article and Find Full Text PDFFront Oral Health
December 2024
Department of Substitutive Dental Sciences, College of Dentistry, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia.
Objectives: The influence of printing parameters on the marginal and internal fit of three-dimensional (3D) printed interim fixed partial dentures (IFPDs) has been understudied. This investigation sought to elucidate the impact of printing orientation and post-curing time on these critical factors.
Methods: A total of 260 3-Unit IFDPs were printed using two different resins (130/NextDent C&B MFH and 130/ASIGA DentaTOOTH).
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!