Experimental study on the direct firing of ceramic ware using concentrated solar energy.

In this study, we developed a solar ceramic kiln to address the problem of CO emissions caused by traditional ceramic ware firing processes. Ceramic specimens were fired using the proposed setup, and their properties were compared with those of an electric-fired ceramic cup (ECC). The solar-fired ceramic cup (SCC) exhibited no cracks on its surface. Its water absorption was 4.25%, open porosity was 9.93%, bulk density was 2.210 g/cm, bending strength was 88.96 MPa, and ovalization was 1.46%. These findings suggested that the physical performance of the SCC was comparable to that of the ECC, which had water absorption of 4.03%, an open porosity of 8.79%, a bulk density of 2.180 g/cm, an ovalization of 1.45%, and a bending strength of 72.4 MPa. The SCC achieved these results in 120 min, which was seven times faster than that of the ECC (firing time of 869 min).