A Hydrogen fuel cell (HFC) broad range associated with Internet of Things (IoT) technologies that require slightly less and constant electricity made possible by remote climate monitoring connections. Novelty demonstrates a miniature HFC based on carbon cloth electrodes and sealing elements manufactured via 3D printing. Cobalt (II) Oxide (CoO)-reduced Graphene Oxide (rGO) and Platinum (Pt) based nanoparticles are coated over carbon cloth to increase the catalytic activity at the anode and cathode. Hydrogen is produced by using an aluminium foil (Al) that is stored in between the filter paper and through capillary action the sodium hydroxide pellets (NaOH) are applied and reacted with Al foil to produce hydrogen. The single HFC device working surface area of 1 × 1 cm effectively generates an open circuit voltage (OCV) of 1.3 V, a current density of 1.602 mA/cm, and a peak power density of 761 mW/cm. The fuel cell stability performance is monitored for up to 10 h. The power obtained from the HFC is stored in a supercapacitor and used to supply energy to the IoT component. The module includes a built-in sensor that monitors the temperature, pressure, and humidity. The measured data is then transmitted to a smartphone via Bluetooth.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11266664PMC
http://dx.doi.org/10.1038/s41598-024-67759-3DOI Listing

Publication Analysis

Top Keywords

fuel cell
12
hydrogen fuel
8
carbon cloth
8
iot enabled
4
enabled carbon
4
carbon cloth-based
4
cloth-based printed
4
hydrogen
4
printed hydrogen
4
cell integrated
4

Similar Publications

Atomically Dispersed Metal-Nitrogen-Carbon Catalysts for Acidic Oxygen Reduction Reaction.

ACS Appl Mater Interfaces

January 2025

School of Integrated Circuits, Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074, P. R. China.

Designing efficient and cost-effective electrocatalysts toward oxygen reduction reaction (ORR) under demanding acidic environments plays a critical role in advancing proton exchange membrane fuel cells (PEMFCs). Metal-nitrogen-carbon (M-N-C) catalysts with atomically dispersed metals have gained attention for their affordability, excellent catalytic performance, and distinctive features including consistent active sites and high atomic utilization. Over the past decade, significant achievements have been made in this field.

View Article and Find Full Text PDF

The purpose of this review is to gain attention about intro the advanced and green technology that has dual action for both clean wastewater and produce energy. Water scarcity and the continuous energy crisis have arisen as major worldwide concerns, requiring the creation of ecologically friendly and sustainable energy alternatives. The rapid exhaustion of fossil resources needs the development of alternative energy sources that reduce carbon emissions while maintaining ecological balance.

View Article and Find Full Text PDF

Although microbial fuel cells (MFC) could be a promising energy source, their implementation is largely limited by low performance. There are several approaches to overcome this issue. For example, MFC performance can be enhanced using redox mediators (RM) capable of transferring electrons between microorganisms and MFC electrodes.

View Article and Find Full Text PDF

Mitochondrial carrier homolog 2 (MTCH2) is a regulator of apoptosis, mitochondrial dynamics, and metabolism. Loss of MTCH2 results in mitochondrial fragmentation, an increase in whole-body energy utilization, and protection against diet-induced obesity. In this study, we used temporal metabolomics on HeLa cells to show that MTCH2 deletion results in a high ATP demand, an oxidized cellular environment, and elevated utilization of lipids, amino acids, and carbohydrates, accompanied by a decrease in several metabolites.

View Article and Find Full Text PDF

Microbial fuel cells to monitor natural attenuation around groundwater plumes.

Environ Sci Pollut Res Int

January 2025

School of Natural and Built Environment, Queen's University Belfast, Belfast, Northern Ireland, BT7 1NN, UK.

This research presents a straightforward and economically efficient design for a microbial fuel cell (MFC) that can be conveniently integrated into a borehole to monitor natural attenuation in groundwater. The design employs conventional, transparent, and reusable PVC bailers with graphite tape and granular activated carbon to create high surface area electrodes. These electrodes are connected across redox environments in nested boreholes through a wire and variable resistor setup.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!