Aqueous Zn-Ag batteries have been developed and commercialized for nearly a century, offering stable discharge and high specific energies. Sodium, with its lower redox potential, smaller charge-to-mass ratio, and abundant resources, presents a promising alternative to zinc. In this study, we successfully developed an all-solid-state Na-Ag battery system. This battery demonstrates stable discharge and charge voltages, low overpotential (0.27 V), high energy efficiency (>91 %), and long cycle life under moderate humidity at room temperature. The reaction mechanism was elucidated through combined analyses using differential electrochemical mass spectrometry (DEMS), X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). Our findings indicate that metallic Ag in the cathode materials acts as an effective catalyst for the oxygen reduction reaction during the initial discharge process, forming NaOH as the discharge product. Ag is then oxidized during the charging process and recovered during discharge, serving as an active reactant in the Na-Ag battery. This work demonstrates superior performance of all-solid-state Na-Ag battery over aqueous Zn-Ag battery. Na-Ag battery may be of interest in applications with stringent requirements on stable discharge voltage and high specific energy.

Download full-text PDF

Source
http://dx.doi.org/10.1002/cssc.202401184DOI Listing

Publication Analysis

Top Keywords

na-ag battery
20
all-solid-state na-ag
12
stable discharge
12
long cycle
8
cycle life
8
low overpotential
8
aqueous zn-ag
8
high specific
8
battery
7
discharge
6

Similar Publications

Aqueous Zn-Ag batteries have been developed and commercialized for nearly a century, offering stable discharge and high specific energies. Sodium, with its lower redox potential, smaller charge-to-mass ratio, and abundant resources, presents a promising alternative to zinc. In this study, we successfully developed an all-solid-state Na-Ag battery system.

View Article and Find Full Text PDF

A Universal Self-Propagating Synthesis of Aluminum-Based Oxyhalide Solid-State Electrolytes.

Angew Chem Int Ed Engl

July 2024

Eastern Institute for Advanced Study, Eastern Institute of Technology, Ningbo, Zhejiang, 315200, P. R. China.

Article Synopsis
  • - Inorganic solid-state electrolytes (SSEs) are crucial for enhancing the performance of high-energy all-solid-state batteries (ASSBs), but traditional preparation methods are too energy-intensive for widespread use.
  • - A new, efficient synthesis method for aluminum-based oxyhalide SSEs is introduced, utilizing an exothermic reaction that allows for cost-effective and scalable production with high ionic conductivities, exceeding 10 S/cm at room temperature for various cations.
  • - The key to achieving high conductivities in these SSEs lies in an amorphous matrix made of oxidized chloroaluminate species, which facilitates smooth ion migration, making these materials promising for practical applications in ASSBs due to their low cost and lightweight nature.*
View Article and Find Full Text PDF

Longevous Sodium Metal Anodes with High Areal Capacity Enabled by 3D-Printed Sodiophilic Monoliths.

ACS Nano

June 2023

College of Energy, Soochow Institute for Energy and Materials Innovations (SIEMIS), Jiangsu Provincial Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies, Soochow University, Suzhou 215006, P. R. China.

Sodium metal anode, featured by favorable redox voltage and material availability, offers a feasible avenue toward high-energy-density devices. However, uneven metal deposition and notorious dendrite proliferation synchronously hamper its broad application prospects. Here, a three-dimensional (3D) porous hierarchical silver/reduced graphene oxide (Ag/rGO) microlattice aerogel is devised as a sodiophilic monolith, which is realized by a direct ink writing 3D printing technology.

View Article and Find Full Text PDF

3D Ag@C Cloth for Stable Anode Free Sodium Metal Batteries.

Small Methods

April 2021

Center of Super-Diamond and Advanced Films (COSDAF) and Department of Chemistry, City University of Hong Kong, Hong Kong SAR, 999077, P. R. China.

While sodium metal anodes (SMAs) feature many performance advantages in sodium ion batteries (SIBs), severe safety concerns remain for using bulk sodium electrodes. Herein, a 3D Ag@C natrophilic substrate prepared by a facile thermal evaporation deposition method, which can be employed as a much safer "anode-free" SMA, is reported. Initially, there is no bulk sodium on the Ag@C substrate in the assembled SIBs.

View Article and Find Full Text PDF

The new members of the Ag2-xNaxMn2Fe(VO4)3 (0 ≤ x ≤ 2) solid solution were synthesized by a solid-state reaction route, and their crystal structures were determined from single-crystal X-ray diffraction data. The physical properties were characterized by Mössbauer and electrochemical impedance spectroscopies, galvanostatic cycling, and cyclic voltammetry. These materials crystallize with a monoclinic symmetry (space group C2/c), and the structure is considered to be a new member of the AA'MM'2(XO4)3 alluaudite family.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!