Purpose: To evaluate the influence of the polymerization distance of monowave and polywave light curing units (LCUs) on the measured irradiance relative to the value reported by the manufacturer in relation to the physical properties of resin-based composites (RBCs).
Methods: Four LCUs were used: one monowave and three polywave. The irradiance was measured with a digital radiometer. Depth of cure (DC) and flexural strength (FS) tests were performed according to ISO 4049:2019 at polymerization distances of 0 mm and 5 mm.
Results: The irradiance of all LCUs was higher than that reported by the manufacturer (>25-64%). The irradiance of the four LCUs was reduced when polymerization was performed at between 0 to 5 mm (paired t-test, P < 0.001). The DC at 0 mm was similar in all groups but was significantly decreased at 5 mm distance (ANOVA P < 0.001). FS showed differences among the LCUs at 0 mm (ANOVA P < 0.001) and was affected by the polymerization distance. The elastic modulus was unaffected by the LCU used or the distance (ANOVA P > 0.001).
Conclusions: The LCU must be positioned as near as possible to RBCs during the polymerization process, as increased distance negatively affects the depth of cure and flexural strength.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.2334/josnusd.24-0045 | DOI Listing |
Dalton Trans
January 2025
Department of Materials Science and Engineering, School of Molecular Science and Engineering, Vidyasirimedhi Institute of Science and Technology (VISTEC), Wangchan, Rayong 21210, Thailand.
Dinuclear aluminum complexes bearing a constrained 'indanimine' ligand based on a short hydrazine bridge were synthesized. Single-crystal X-ray crystallography reveals bimetallic penta-coordinated aluminum centers having a distorted trigonal bipyramidal geometry. A short Al-Al distance of 4.
View Article and Find Full Text PDFChemistry
January 2025
Brandeis University, Chemistry, 415 South Street,, Waltham, 02453, UNITED STATES OF AMERICA.
We designed and synthesized three diacetylene monomers M1-M3 having two NH2 groups. As anticipated, the NH2 groups aided the preorganization of these monomers by N-H…N hydrogen bonding. In the crystals of monomer M1 and M2, the intermolecular N-H…N hydrogen bonding preorganized the diyne units in an orientation suitable for their topochemical polymerization, but in the case of monomer M3, the distance was slightly larger than that recommended for the topochemical reaction.
View Article and Find Full Text PDFBMC Oral Health
January 2025
Department of Endodontics, School of Dentistry, Shahid Sadoughi University of Medical Sciences, Yazd, Iran.
Objectives: This study aimed to compare the marginal adaptation of a cold ceramic (CC) sealer with the single-cone obturation technique with that of an AH-26 sealer with the lateral compaction technique in single-canal teeth.
Materials And Methods: In this in vitro experimental study, the root canals of 24 extracted single-rooted single-canal teeth were instrumented to F3 files by the crown-down technique and randomly assigned to 2 groups (n = 12). The root canals were obturated with a CC sealer and single-cone obturation technique with 4% gutta-percha in group 1 and with an AH-26 sealer and lateral compaction technique with 2% gutta-percha in group 2.
PLoS One
January 2025
Waste Data and Analysis Center, Department of Technology & Society, Stony Brook University, Stony Brook, New York, United States of America.
The composition of solid waste affects technology choices and policy decisions regarding its management. Analyses of waste composition studies are almost always made on a parameter by parameter basis. Multivariate distance techniques can create wholisitic determinations of similarities and differences and were applied here to enhance a series of waste composition comparisons.
View Article and Find Full Text PDFPulsed Dipolar ESR Spectroscopy (PDS) is a uniquely powerful technique to characterize the structural property of intrinsically disordered proteins (IDPs) and polymers and the conformational evolution of IDPs and polymers, e.g. during assembly, by offering the probability distribution of segment end-to-end distances.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!