Calibration of Thermal Viscoelastic Material Models for the Dynamic Responses of PVB and SG Interlayer Materials.

Laminated glass interlayer materials polyvinyl butyral (PVB) and SentryGlas (SG, kuraray, Houstan, TX, USA) exhibit thermal viscoelastic behavior under dynamic tensile loading. Significant temperature and strain rate effects on the behavior of these interlayer materials pose a challenge for accurately modeling the dynamic response of laminated glass. Many researchers have simplified their approaches by modeling the response of the interlayer material using a bilinear approximation or established hyperelastic models. However, temperature and strain rate effects can be captured using the three-network viscoplastic (TNV) model. Therefore, the objective of this study is to calibrate material models for the thermal viscoelastic dynamic responses of PVB and SG interlayer materials. Uniaxial tensile tests were performed at strain rates of 2, 20, and 45 s and temperatures of 0, 23, and 60 °C, and material models were calibrated using the experimental data. Finite element analysis using the calibrated material models successfully predicted the dynamic responses of PVB and SG under the experimental test conditions within a 10% error margin. This suggests that the calibrated models using the TNV model represent significant improvements over existing approaches to modeling the dynamic response of laminated glass. Similar procedures can be applied to other thermoplastics, laying the groundwork for establishing a standard calibration guide.