The biaxial flexural strength of universal shade and conventional dental resin-based composites before and after alkaline degradation was investigated. Disk samples were prepared from these resin-based composites, and some of the specimens were immersed in 0.1 M NaOH solution to create deteriorated samples. The biaxial flexural strength of the samples before and after the alkaline degradation test was measured and statistically tested. The fracture surfaces after the biaxial flexural test were observed using a scanning electron microscope. The results showed that the biaxial flexural strength of the paste-type universal shade resin-based composite before alkaline degradation was significantly (19%) higher than that of the conventional type, but no difference was observed between the materials after alkaline degradation. On the other hand, the biaxial flexural strength of the flowable universal shade resin-based composites was significantly (around 35%) lower than that of the conventional composite, with or without degradation. Although, for paste-type materials, the biaxial flexural strength of universal shade resin-based composites was higher than that of conventional resin-based composites before alkaline degradation, after degradation the two materials showed similar values. For flowable materials, the biaxial flexural strength of universal shade resin-based composites was lower than that of conventional resin-based composites regardless of the presence or absence of degradation processes. These results suggest that some caution should be used when deciding whether to use flowable universal shade resin-based composite to fill a cavity.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11244099 | PMC |
| http://dx.doi.org/10.3390/polym16131853 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Effects of home bleaching agents on hybrid ceramics: mechanical properties and color change.
BMC Oral Health
January 2025
Department of Fixed Prosthodontics - Faculty of Dentistry, Ain Shams University, Organization of African Unity, St, El-Qobba Bridge, El Weili, Cairo Governorate, Egypt.
Background: Home bleaching is a promising option for addressing discolored teeth conservatively. However, its impact on the physical and mechanical properties of indirect restorations remains unknown. This study provides comparative insights into the material responses to aesthetic treatments by assessing the effects of home bleaching agents on two hybrid ceramics: VITA ENAMIC and Grandio Blocs.
View Article and Find Full Text PDFEffect of extrinsic pigmentation and multiple firing cycles on the properties of a zirconia-containing lithium silicate ceramic.
J Prosthodont
January 2025
Department of Dentistry, Federal University of Rio Grande do Norte (UFRN), Lagoa Nova, Natal, Brazil.
Purpose: To assess the impact of staining and multiple firings on the mechanical, optical, and surface characteristics of zirconia-containing lithium silicate ceramics (ZLS).
Materials And Methods: Ninety ZLS discs (Suprinity, VITA Zahnfabrick) were divided according to the "Number of firings" protocol: Ctr-control, no characterization; SC-single firing cycle (for characterization, crystallization and staining simultaneously); and DC-double firing cycle (crystallization firing cycle was performed separately from the staining firing). Extrinsic pigmentation was performed to replicate the characterization of a monolithic restoration.
Crystallization by microwave energy: Effects on the survival probability of lithia-based glass ceramics.
Braz Oral Res
January 2025
Universidade Estadual Paulista - Unesp, Institute of Science and Technology, Department of Dental Materials and Prosthodontics, São José dos Campos, SP, Brazil.
This study evaluated the survival probabilities of two lithia-based glass-ceramics after final crystallization in a microwave furnace using conventional crystallization as a reference. Disc-shaped samples of a lithium silicate (LS, Celtra Duo) and a lithium disilicate (LD, e.max CAD) were prepared and divided into two groups according to the crystallization method (n = 30): microwave (M) or conventional furnaces (C).
View Article and Find Full Text PDFDentin remineralization induced by experimental composites containing calcium orthophosphate particles.
Dent Mater
December 2024
University of São Paulo School of Dentistry, Department of Biomaterials and Oral Biology, Av. Prof. Lineu Prestes, 2227, São Paulo, SP 05508-000, Brazil. Electronic address:
Objectives: This study aimed to verify if composites containing dicalcium phosphate dihydrate particles (DCPD) are able to induce dentin remineralization in vitro. Additionally, the mechanical properties of the materials were tested.
Methods: Four composites with 50 vol% inorganic content and 1 BisGMA: 1 TEGDMA (mols) were prepared, with different DCPD:glass ratios (50:0, 40:10, 30:20 and 0:50).
Carbon Fiber-Reinforced Thermoplastic Composite Coatings for Steel Pipelines.
Polymers (Basel)
December 2024
Advanced Composites Research Lab, Faculty of Science, Galala University, Galala City 43511, Egypt.
Article Synopsis
- Steel pipeline systems, which transport about 75% of the world's oil and gas, require protective coatings to prevent corrosion and erosion.
- This research introduces a multi-layered composite coating made from carbon fiber-reinforced thermoplastic polymer (CFRTP) as an alternative to traditional epoxy-based coatings.
- The study evaluates the physical, mechanical, and corrosion-resistant properties of the coated carbon steel samples, revealing that the unidirectional (UD) composite offers the highest flexural strength, while the biaxial composite exhibits the best corrosion resistance.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!