Exposure of metals to neutron irradiation results in an increase in the yield strength and a significant loss of ductility. Irradiation hardening is also closely related to the fracture toughness temperature shift or the ductile-to-brittle transition temperature (DBTT) shift in alloys with a body-centered cubic (bcc) crystal structure. Ion irradiation is an indispensable tool in the study of the radiation effects of materials for nuclear energy systems. Due to the shallow damage depth in ion-irradiated materials, the nanoindentation test is the most commonly used method for characterizing the changes in mechanical properties after ion irradiation. Issues that affect the analysis of irradiation hardening may arise due to changes in the surface morphology and mechanical properties, as well as the inherent complexities in nanoscale indentation. These issues, including changes in surface roughness, carbon contamination, the pile-up effect, and the indentation size effect, with corresponding measures, were reviewed. Modeling using the crystal plasticity finite element method of the nanoindentation of ion-irradiated materials was also reviewed. The challenges in extending the nanoindentation test to high temperatures and to multiscale simulation were addressed.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11243094 | PMC |
| http://dx.doi.org/10.3390/ma17133286 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Dentin remineralization induced by experimental composites containing calcium orthophosphate particles.
Dent Mater
December 2024
University of São Paulo School of Dentistry, Department of Biomaterials and Oral Biology, Av. Prof. Lineu Prestes, 2227, São Paulo, SP 05508-000, Brazil. Electronic address:
Objectives: This study aimed to verify if composites containing dicalcium phosphate dihydrate particles (DCPD) are able to induce dentin remineralization in vitro. Additionally, the mechanical properties of the materials were tested.
Methods: Four composites with 50 vol% inorganic content and 1 BisGMA: 1 TEGDMA (mols) were prepared, with different DCPD:glass ratios (50:0, 40:10, 30:20 and 0:50).
Design, additive manufacturing, and characterization of an organ-on-chip microfluidic device for oral mucosa analogue growth.
J Mech Behav Biomed Mater
December 2024
Department of Prosthodontics, Dental and Craniofacial Bioengineering and Applied Biomaterials, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, Thessaloniki, 54124, Greece. Electronic address:
Introduction: Α customized organ-on-a-chip microfluidic device was developed for dynamic culture of oral mucosa equivalents (Oral_mucosa_chip-OMC).
Materials And Methods: Additive Manufacturing (AM) was performed via stereolithography (SLA) printing. The dimensional accuracy was evaluated via microfocus computed tomography (mCT), the surface characteristics via scanning electron microscopy (SEM), while the mechanical properties via nanoindentation and compression tests.
Preparation of Thermal Conductivity-Enhanced, Microencapsulated Phase Change Materials Using Cellulose-Assisted Graphene Dispersion for Thermal Regulation in Textiles.
Polymers (Basel)
November 2024
State Key Laboratory of NBC Protection for Civilian, Beijing 100191, China.
To improve the poor thermal conductivity of microencapsulated phase change materials (MPCMs), a strategy was designed with effective combinations between graphene nanosheets (GNs) and shells to prepare thermally conductive MPCMs-GNs by using cellulose nanofibers (CNFs) to assist GN dispersion. The experiments and theoretical calculations both illustrated that CNFs effectively prevented GNs from aggregating due to the strong Van der Walls interactions between CNFs and GNs. The morphologies and structures of MPCMs with and without GNs were characterized by SEM, FTIR and XRD.
View Article and Find Full Text PDFTopological regulation in polysilsesquioxanes for achieving super-hard and flexible membranes: insights from molecular simulation.
Mater Horiz
December 2024
Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education Beijing University of Chemical Technology, Beijing 100029, China.
Cage-like and ladder-like polysilsesquioxane, named EPOSS and ELPSQ, were synthesized and employed as precursors to develop a UV-curable membrane exhibiting remarkable hardness, superior flexibility, exceptional transparency and excellent friction resistance. Nanoindentation analysis demonstrates that the precise control of the Silicane molecular frameworks by adding a small quantity of EPOSS to ELPSQ can significantly enhance the hardness of the membranes. The resulting hardness value reaches a record 1.
View Article and Find Full Text PDFSmart Coating of Carbon Steel Using Polystyrene Clay Nanocomposites Loaded with Cerium and Silanol Inhibitors: Characterization and Electrochemical Study.
Polymers (Basel)
November 2024
Chemistry Department, Science College, King Saud University, Riyadh 145111, Saudi Arabia.
Local Khulays clay was modified to prepare polystyrene clay nanocomposite (PCN) coatings on carbon steel. The PCN coatings were added to microcapsules (MCs) loaded with the corrosion inhibitor PCN(MC). The microcapsules were prepared by the encapsulation of rare-earth metal Ce ions and isobutyl silanol into polystyrene via the double emulsion solvent evaporation (DESE) technique.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!