In this paper, glow nitriding processes at cathode potential are used at various temperatures to investigate how they affect the corrosion resistance of 316L steel in ethanol at temperatures of 22 °C and -30 °C. Lowering the test temperature reduces the corrosion rate of the nitrided layers. Conversely, glow nitriding at 450 °C improves the corrosion resistance of the tested steel. Increasing the nitriding temperature to 520 °C increases the corrosion rate. It should be noted that the ethyl alcohol solution, due to the lack of aggressive ions, does not cause significant changes in the corrosion rate of the steel. The value of the corrosion current varies in the range of 10-10 µA/cm. Nitrided layers increase the contact angle measured for water and are entirely wettable for ethanol. The objective of this study is to evaluate the effect of the nitriding temperature of AISI 316L steel on its corrosion resistance in an ethanol solution at room temperature and at -30 °C.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11242625 | PMC |
| http://dx.doi.org/10.3390/ma17133056 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Desired Color Diversity of Carbon Fiber with Excellent Environmental Super-Durability and Remarkable Flame Retardancy.
ACS Appl Mater Interfaces
January 2025
State Key Laboratory of New Textile Materials and Advanced Processing Technologies, College of Textile Science and Engineering, Wuhan Textile University, Wuhan 430200, P. R. China.
Carbon fiber (CF) has been widely used in aerospace, military, infrastructure, sports, and leisure fields owing to its excellent mechanical properties, superior corrosion and friction resistances, excellent thermal stability, and lightweight. However, the ultrablack appearance derived from the extremely strong absorption of light throughout the entire visible region makes it difficult to satisfy the aesthetic and pleasurable demands of the colorful world and limits their applications in a broader field. Herein, inspired by the , a double-layer ultrathin AlO/TiO composite structure was fabricated on CFs by the atomic layer deposition method.
View Article and Find Full Text PDFA Comprehensive Review of Niobium Nanoparticles: Synthesis, Characterization, Applications in Health Sciences, and Future Challenges.
Nanomaterials (Basel)
January 2025
Department of Functional Materials and Electronics, State Research Institute Centre for Physical Sciences and Technology (FTMC), 10257 Vilnius, Lithuania.
Niobium nanoparticles (NbNPs) have gained attention as promising materials in biomedical applications due to their exceptional biocompatibility, corrosion resistance, and versatility. These nanoparticles offer potential in drug delivery, imaging, and tissue engineering, where their nanoscale properties allow precise interactions with biological systems. Among niobium-based nanomaterials, niobium pentoxide (NbO) is the most extensively studied due to its chemical stability, bioactivity, and optical properties.
View Article and Find Full Text PDFSignificance of the Powder Metallurgy Approach and Its Processing Parameters on the Mechanical Behavior of Magnesium-Based Materials.
Nanomaterials (Basel)
January 2025
Faculty of Engineering, University of Kragujevac, SestreJanjić 6, 34000 Kragujevac, Serbia.
Magnesium-based materials, which are known for their light weight and exceptional strength-to-weight ratio, hold immense promise in the biomedical, automotive, aerospace, and military sectors. However, their inherent limitations, including low wear resistance and poor mechanical properties, have driven the development of magnesium-based metal matrix composites (Mg-MMCs). The pivotal role of powder metallurgy (PM) in fabricating Mg-MMCs was explored, enhancing their mechanical and corrosion resistance characteristics.
View Article and Find Full Text PDFElectrodepositing Ag on Anodized Stainless Steel for Enhanced Antibacterial Properties and Corrosion Resistance.
J Funct Biomater
January 2025
Jiangsu Key Laboratory for Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing 211189, China.
Antibacterial stainless steels have been widely used in biomedicine, food, and water treatment. However, the current antibacterial stainless steels face challenges in balancing corrosion resistance and antibacterial effectiveness, limiting their application range and lifespan. In this study, an oxide layer sealed with antibacterial Ag particles was constructed on the surface of 304 stainless steel through anodizing and electrodeposition, and the process parameters were optimized for achieving long-term antibacterial properties.
View Article and Find Full Text PDFMachinability and surface integrity analysis of Ti-17 alloy using WEDC for advanced aero-engine application.
Heliyon
January 2025
University of Coimbra, CEMMPRE, ARISE, Department of Mechanical Engineering, Rua Luís Reis Santos, 3030-788, Coimbra, Portugal.
Recent advancements in aerospace industry demand intricate aero-engine parts, leading to the increased use of titanium alloys, particularly Ti-17, due to its high strength, thermal stability, and corrosion resistance. However, its low thermal conductivity and tool wear tendency pose significant machining challenges, impacting surface integrity, fatigue life, and overall component performance. This study investigates the Wire Electrical Discharge Cutting (WEDC) process, revealing that the mechanism behind improved surface integrity lies in the controlled thermal input, which minimizes phase transformations and reduces residual stresses.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!