This paper presents a reduced-order numerical modeling approach for the analysis of heat transfer in composite floor slabs with profiled steel decking exposed to fire effects. This approach represents the thick and thin portions of a composite slab with alternating strips of shell elements, using a layered thick-shell formulation that accounts for both in-plane and through-thickness heat transfer. To account for the tapered profile of the ribs, layered shell elements representing the thick portion of the slab adopt a linear reduction in the density of concrete within the depth in the rib. The specific heat of concrete in the rib is also proportionally reduced to indirectly consider the heat input through the web of the decking, because the reduced-order model considers thermal loading only on the upper and lower flanges of the decking. The optimal ratio of modified and actual specific heat of concrete in the rib is determined, depending on the ratio of the height of the upper continuous portion to the height of the rib. The reduced-order modeling approach is validated against experimental results.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11231914 | PMC |
| http://dx.doi.org/10.1061/(asce)st.1943-541x.0002650 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Enhanced Sensor Placement Optimization and Defect Detection in Structural Health Monitoring Using Hybrid PI-DEIM Approach.
Sensors (Basel)
December 2024
PIMM Research Laboratory, UMR 8006 CNRS-ENSAM-CNAM, Arts et Metiers Institute of Technology, 151 Boulevard de l'Hôpital, 75013 Paris, France.
This work introduces a novel methodology for identifying critical sensor locations and detecting defects in structural components. Initially, a hybrid method is proposed to determine optimal sensor placements by integrating results from both the discrete empirical interpolation method (DEIM) and the random permutation features importance technique (PI). Subsequently, the identified sensors are utilized in a novel defect detection approach, leveraging a semi-intrusive reduced order modeling and genetic search algorithm for fast and reliable defect detection.
View Article and Find Full Text PDFExploring the influence of parametrized pulsatility on left ventricular washout under LVAD support: a computational study using reduced-order models.
Comput Methods Biomech Biomed Engin
March 2024
RWTH Aachen University, Aachen, Germany.
Introducing pulsatility in LVADs is known to reduce complications such as stagnation and thrombosis, but it is an ongoing topic of research on what the optimal form is. We present a framework consisting of parametrized full-order simulations, reduced-order models, and sensitivity analysis to systematically quantify the effects of parametrized pulsatility on washout. As a sample problem, we study the washout in an idealized 2D left ventricle and a parametrized sinusoidal LVAD flow rate.
View Article and Find Full Text PDFImplementation of Principal Component Analysis (PCA)/Singular Value Decomposition (SVD) and Neural Networks in Constructing a Reduced-Order Model for Virtual Sensing of Mechanical Stress.
Sensors (Basel)
December 2024
Fundación Centro Tecnológico CTC-Scientific and Technological Park of Cantabria (PCTCAN), Street Isabel Torres Nº 1, 39011 Santander, Spain.
This study presents the design and validation of a numerical method based on an AI-driven ROM framework for implementing stress virtual sensing. By leveraging Reduced-Order Models (ROMs), the research aims to develop a virtual stress transducer capable of the real-time monitoring of mechanical stresses in mechanical components previously analyzed with high-resolution FEM simulations under a wide range of multiple load scenarios. The ROM is constructed through neural networks trained on Finite Element Method (FEM) outputs from multiple scenarios, resulting in a simplified yet highly accurate model that can be easily implemented digitally.
View Article and Find Full Text PDFFatigue-Induced Failure of Polysilicon MEMS: Nonlinear Reduced-Order Modeling and Geometry Optimization of On-Chip Testing Device.
Micromachines (Basel)
December 2024
Department of Civil and Environmental Engineering, Politecnico di Milano, Piazza Leonardo da Vinci, 32, 20133 Milano, Italy.
In the case of repeated loadings, the reliability of inertial microelectromechanical systems (MEMS) can be linked to failure processes occurring within the movable structure or at the anchors. In this work, possible debonding mechanisms taking place at the interface between the polycrystalline silicon film constituting the movable part of the device and the silicon dioxide at the anchor points are considered. In dealing with cyclic loadings possibly inducing fatigue failure, a strategy is proposed to optimize the geometry of an on-chip testing device designed to characterize the strength of the aforementioned interface.
View Article and Find Full Text PDFMicroelectromechanical System Resonant Devices: A Guide for Design, Modeling and Testing.
Micromachines (Basel)
November 2024
Civil and Environmental Engineering Department, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano, Italy.
Microelectromechanical systems (MEMSs) are attracting increasing interest from the scientific community for the large variety of possible applications and for the continuous request from the market to improve performances, while keeping small dimensions and reduced costs. To be able to simulate a priori and in real time the dynamic response of resonant devices is then crucial to guide the mechanical design and to support the MEMSs industry. In this work, we propose a simplified modeling procedure able to reproduce the nonlinear dynamics of MEMS resonant devices of arbitrary geometry.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!