Changes in Physical and Water Sorption Characteristics of Three Solid Woods after One-Sided Surface Charring.

One-sided surface charring of wood is a modification process used to lower moisture absorption and improve the resistance to biological degradation for durable surface exterior claddings. , and wood samples from fast-growth plantation were charred with a hot plate using three temperatures (300, 350, and 400 °C ± 3 °C) for 10 min. Wood density, surface quality (color and presence of splits), and sorption characteristics (wetting rate and water uptake) were evaluated. Results show that samples charred at 300 °C presented a lower loss of density and thickness than samples charred at 400 °C. Changes in the chemical structure of the wood as a result of the high temperatures caused a decrease of all color parameters (L*, a*, and b*). These values decreased in the samples charred at 400 °C for the three species. Also, the presence of cracks and splits on the surface, or in some cases the presence of detachments from the charring surface, was mostly observed in the samples charred at 350 and 400 °C. One-sided surface charring reduced the liquid water sorption of wood samples in comparison with that of reference samples, especially for and . , due to the composition of its anatomical structure and its initial density, chars faster than the other species, causing a greater loss of density, wetting rate values like those of the reference wood, and higher values of water uptake.