Flexible phase change film based on lignin-derived porous carbon/Eicosane for wearable thermal management and microwave absorption.

A flexible phase-change film with thermal management and microwave absorption capabilities was developed for use in wearable devices. The film was created using a solution casting method based on a porous carbon-loaded eicosane (LP33/EI) material. LP33 served as the porous encapsulation medium, while Eicosane (EI) acted as the phase change component. The flexible substrate was a blend of polyvinyl alcohol (PVA) and bacterial cellulose nanocellulose (BC). The ultrathin film had a thickness of 0.262 mm, and LP33/EI-4 exhibited exceptional mechanical strength of 188 MPa. Testing revealed that the phase transition process had melting and crystallization enthalpies of 134.71 J/g and 126.11 J/g, respectively. The encapsulation structure effectively prevented any leakage during the phase transition process. Under simulated solar irradiation of 200 mW/cm, LP33/EI-4 achieved a photothermal conversion efficiency (η) of 89.46 %. Additionally, the porous LP33 structure and high dielectric loss contributed to remarkable microwave absorption capabilities of -42 dB in the X-band and - 52 dB in the Ku-band. Overall, LP33/EI films demonstrated exceptional performance in thermal management, energy storage, and microwave absorption, making them an ideal choice for a variety of applications in wearable devices.