A novel, to the best of our knowledge, approach to generate frequency-tunable microwave sources with low-phase-noise based on a Brillouin laser frequency comb is proposed and experimentally demonstrated. The Brillouin laser frequency comb is generated by combining stimulated Brillouin scattering, frequency shifting optical injection locking, modulation sideband optical injection locking (MSOIL), and four-wave mixing effects. By beating the generated comb lines, the microwave is generated with an extremely low-level phase noise of -120 dBc/Hz at a 10-kHz offset. The frequency of the microwave signal can be finely tuned in steps of a Brillouin cavity mode spacing (i.e., 2 MHz) and coarsely adjusted to integer times the applied RF signal frequency in the MSOIL unit. Remarkably, the phase noise of the microwave source can be kept at almost the same low level during the whole tuning process over the frequency range of 30-75 GHz. The proposed tunable low-phase-noise microwave generation approach has great potential applications in communications, radars, and metrology.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OL.525467 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Narrow Linewidth All-Optical Microwave Oscillator Based on Torsional Radial Acoustic Modes of Single-Mode Fiber.
Micromachines (Basel)
January 2025
Key Laboratory of Instrumentation Science and Dynamic Measurement Ministry of Education, North University of China, Taiyuan 030051, China.
A Hz level narrow linewidth all-optical microwave oscillator based on the torsional radial acoustic modes (TR) of a single-mode fiber (SMF) is proposed and validated. The all-optical microwave oscillator consists of a 20 km SMF main ring cavity and a 5 km SMF sub ring cavity. The main ring cavity provides forward stimulated Brillouin scattering gain and utilizes a nonlinear polarization rotation effect to achieve TR mode locking.
View Article and Find Full Text PDFAn Approach to Reduce Tuning Sensitivity in the PIC-Based Optoelectronic Oscillator by Controlling the Phase Shift in Its Feedback Loop.
Micromachines (Basel)
December 2024
Research Laboratory "Sensor Systems Based on Integrated Photonics Devices", Ufa University of Science and Technology, 32, Z. Validi St., Ufa 450076, Russia.
Radio photonic technologies have emerged as a promising solution for addressing microwave frequency synthesis challenges in current and future communication and sensing systems. One particularly effective approach is the optoelectronic oscillator (OEO), a simple and cost-effective electro-optical system. The OEO can generate microwave signals with low phase noise and high oscillation frequencies, often outperforming traditional electrical methods.
View Article and Find Full Text PDFDirect calibration of microwave amplification chain on an axion cavity haloscope.
Rev Sci Instrum
January 2025
Department of Physics, National Central University, Taoyuan City 320317, Taiwan.
In an axion haloscope, the weak photon signal, theoretically converted from axions, is captured by a detection cavity. The signal from the cavity is too weak to be acquired by a signal receiver. The amplification chain assists the signal acquisition by amplifying the signal and requires accurate gain calibration.
View Article and Find Full Text PDFUltrabroadband integrated electro-optic frequency comb in lithium tantalate.
Nature
January 2025
Institute of Physics, Swiss Federal Institute of Technology Lausanne (EPFL), Lausanne, Switzerland.
The integrated frequency comb generator based on Kerr parametric oscillation has led to chip-scale, gigahertz-spaced combs with new applications spanning hyperscale telecommunications, low-noise microwave synthesis, light detection and ranging, and astrophysical spectrometer calibration. Recent progress in lithium niobate (LiNbO) photonic integrated circuits (PICs) has resulted in chip-scale, electro-optic (EO) frequency combs, offering precise comb-line positioning and simple operation without relying on the formation of dissipative Kerr solitons. However, current integrated EO combs face limited spectral coverage due to the large microwave power required to drive the non-resonant capacitive electrodes and the strong intrinsic birefringence of LiNbO.
View Article and Find Full Text PDFMicrowave thermal imaging system for debonding detection of radar absorbing materials.
Rev Sci Instrum
January 2025
College of Public Health, Sichuan University, Chengdu 610041, China.
In this paper, a microwave thermal imaging system (MTIS) has been presented for debonding detection of radar absorbing materials (RAMs). First, an overview of the mechanism underlying microwave heating and the fundamental principle of defect detection within RAMs is presented. Then, a multifunctional MTIS capable of performing both microwave lock-in thermography (MLIT) and long-pulse microwave thermography (LPMT) has been introduced, specifically tailored for the in situ inspection of RAMs.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!