We propose and demonstrate a dual-band microwave photonic radar scheme based on a monolithic integrated mutual injection laser. Based on the photon-photon resonance (PPR) and the gain switching effect of the integrated laser, the C-/X-band triangular chirp signals with high-quality and comparable power at 4.75-5.25 GHz and 9.5-10.5 GHz are generated. In the current proof-of-concept experiment, the range resolution of the dual-band chirp signals can reach 16.9 cm, compared with the single-band chirp signal that cannot distinguish the targets. Through the application of a single integrated device and a transceiver module sharing a set of antennas, the dual-band microwave photonic radar system scheme improves the system integration.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OL.517489 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fully 4D-Printed Near-Infrared-Actuated Lab-on-Valve Solid-Phase Extraction Devices.
Anal Chem
December 2024
Department of Chemistry, National Chung Hsing University, Taichung City 402202, Taiwan, ROC.
Four-dimensional printing (4DP) technologies can expand the functionality of stimuli-responsive devices to enable the integration of multiple stimuli-responsive parts into a compact device. Herein, we used digital light processing three-dimensional printing technique, flexible photocurable resins, and photocurable resins of the temperature-responsive hydrogels comprising -isopropylacrylamide (NIPAM), ,'-methylenebis(acrylamide) (MBA), and graphene for 4DP of a lab-on-valve (LOV) solid-phase extraction (SPE) device. This device featured flow manifolds and a monolithic packing connected by four near-infrared (NIR)-actuated temperature-responsive switching valves composed of a poly(NIPAM/MBA) (PNM) ball pushing a flexible membrane.
View Article and Find Full Text PDFIn-depth analysis of active compounds targeting tropomyosin-related kinase A via constructed lipid raft @capillary monolith affinity chromatography.
J Chromatogr B Analyt Technol Biomed Life Sci
December 2024
School of Pharmacy, Jiangsu University, Zhenjiang 212013, China. Electronic address:
In order to enrich the selection of biological ligands, realize the miniaturization analysis, and broaden the application of monolith materials for active ingredients screening and separating, we sough to construct a lipid raft @capillary monolith microcolumn affinity chromatography model. Single factor experiments and various characterization methods, including scanning electron microscopy (SEM) and thermogravimetric analysis, were employed to investigate the polymerization of the monolith column under different material ratios to determine optimal preparation conditions. Subsequently, the lipid raft from U251 cells was integrated with the monolith materials based on epoxy-based covalent crosslinking principle and characterized through SEM and immunofluorescence methods.
View Article and Find Full Text PDFBiomechanical behavior of cantilevered 3-unit implant-supported prostheses made of PEKK and monolithic zirconia: A finite element study.
J Mech Behav Biomed Mater
December 2024
Oral Technology, Dental School, University Hospital Bonn, Bonn, Germany. Electronic address:
Article Synopsis
- The study aimed to assess the biomechanical performance of different designs of three-unit implant-supported prostheses using two materials (Zirconia and PEKK) under various loading conditions.
- Three models were created with different implant placements to analyze three designs: distal cantilever, fixed-fixed, and mesial cantilever, utilizing finite element analysis for stress evaluation.
- Results indicated that the fixed-fixed design performed best, with PEKK showing lower stress in some areas but higher stress in others compared to Zirconia, highlighting the importance of design and material choice in prosthodontics.
Densely distributed Co onto carbon-layer-coated flower-like Ni/AlO and its tailored integration into a stirrer for multiple catalytic degradation and solar-powered water evaporation.
Nanoscale
December 2024
School of Environmental and Chemical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China.
Multiple functional tailored materials have shown great potential for both pollutant degradation and freshwater recovery. In this study, we synthesized densely distributed Co onto carbon-layer-coated Ni/AlO hydrangea composites (Ni/AlO@Co) the polymerization of dopamine under a controlled graphitized process. The characterization results revealed that Ni/AlO@Co, with abundant exposed bimetallic Co-Ni species on the surface of AlO, could afford accessible catalytic sites for persulphate activation and subsequent pollutant degradation.
View Article and Find Full Text PDFGrowth-based monolithic 3D integration of single-crystal 2D semiconductors.
Nature
December 2024
Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA.
The demand for the three-dimensional (3D) integration of electronic components is steadily increasing. Despite substantial processing challenges, the through-silicon-via (TSV) technique emerges as the only viable method for integrating single-crystalline device components in a 3D format. Although monolithic 3D (M3D) integration schemes show promise, the seamless connection of single-crystalline semiconductors without intervening wafers has yet to be demonstrated.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!