This study examined the influence of growth temperature and dopant concentration on the properties of Gd- and Ni-doped zinc oxide nanorods (ZnO NRs). ZnO seed layers were deposited on glass substrates using a sol-gel and dip-coating approach. Gd- and Ni-doped ZnO NRs were hydrothermally grown on the seed layers at different temperatures such as 75, 90, and 105°C for a constant growth time of 5 h. The crystal structure, optical, surface morphology views, and electrical properties of the NRs were extensively investigated by x-ray diffraction (XRD), scanning electron microscopy (SEM), UV-visible spectroscopy, and four probe experimental methods. The XRD analysis confirmed the successful substitution of Zn ions by Gd and Ni within the ZnO main matrices. The reordering of hexagonal structures with varied electronegativity, ionic radius dimensions, and valence electron states of Gd and Ni dopants affected seriously the fundamental characteristic features of NRs. The SEM images showed that the ZnO NRs grown at 90°C possessed a more favorable surface morphology and well-defined hexagonal shape compared with those grown at other growth temperatures. Higher dopant concentration led to an increase in NR diameter but a decrease in density depending on the increase in the space between the NRs. Additionally, the optical transmittance was found to generally enhance with increasing dopant concentration. The results obtained highlighted the interplay between growth temperature, dopant type and concentration in tailoring the structural, morphological, and optical properties of Gd- and Ni-doped ZnO NRs, paving the way for the development of optimized nanomaterials for various applications. RESEARCH HIGHLIGHTS: The XRD analysis confirmed the successful substitution of Zn ions by Gd and Ni within the ZnO main matrices. The SEM images showed that the ZnO NRs grown at 90°C possessed a more favorable surface morphology and well-defined hexagonal shape compared with those grown at other growth temperatures. The optical transmittance was found to generally enhance with increasing dopant concentration. The results obtained highlighted the interplay between growth temperature, dopant type and concentration in tailoring the structural, morphological, and optical properties of Gd- and Ni-doped ZnO NRs, paving the way for the development of optimized nanomaterials for various applications.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/jemt.24635 | DOI Listing |
RSC Adv
November 2024
Department of Science and Technology, Physics Electronics and Mathematics, Linköping University SE-60174 Norrköping Sweden +46 11 36 32 19.
Water Res
January 2025
Department of Chemical and Materials Engineering, University of Alberta, Edmonton, AB T6G 1H9, Canada. Electronic address:
One of the main challenges in applying photocatalysts for water treatment is the complex separation and recycling process. In this study, we developed highly stable, porous zinc oxide nanorods (ZnO NRs) immobilized on glass vials using a solvent exchange process (SEP) and hydrothermal calcination. Key parameters, including oleic acid concentration and hydrothermal growth time, were optimized to maximize the active surface area, significantly enhancing photodegradation performance.
View Article and Find Full Text PDFLangmuir
November 2024
School of Materials Science and Engineering, Changchun University, Changchun 130022, China.
Staggered gap p-n heterojunction ZnO nanorods/AgO nanoparticles, a paradigm of photocatalysts, were developed via engineering the hydrothermal and coprecipitation method. Under simulated sunlight, the photocatalytic characteristics of ZnO/AgO(Zn/A) heterojunctions with varying mole ratios (from 8:1 to 8:4, named Zn/A-1-Zn/A-4) were systematically evaluated through the degradation of methylene blue (MB). The influence of key experimental variables, including photocatalyst concentration, MB concentration, and solution pH, on the photocatalyst performance was further analyzed.
View Article and Find Full Text PDFInt J Biol Macromol
December 2024
Centre for Medical Biotechnology, Maharshi Dayanand University, Rohtak, Haryana 124007, India. Electronic address:
An electrochemical sensor has received much attention due to its importance for early infection identification, hinting at its critical relevance in diagnostic applications. For the detection of field-isolated strains of Pasteurella multocida, this paper reports the development and fabrication of a DNA-based electrochemical biosensor by integrating zinc oxide (ZnO) nanorods (NRs) into an electrochemical paper-based analytical device (ePAD). One significant improvement over the state-of-the-art features of the sensor is the using paper, an economically viable substrate that can be manufactured in large numbers.
View Article and Find Full Text PDFMolecules
September 2024
TEMA Research Center, "G. d'Annunzio" University of Chieti-Pescara, 66100 Chieti, Italy.
A new easy protocol to functionalize the middle layer of commercial surgical face masks (FMs) with Zn and Cu oxides is proposed in order to obtain antibacterial personal protective equipment. Zinc and copper oxides were synthesized embedded in a polydopamine (PDA) shell as potential antibacterial agents; they were analyzed by XRD and TEM, revealing, in all the cases, the formation of metal oxide nanoparticles (NPs). PDA is a natural polymer appreciated for its simple and rapid synthesis, biocompatibility, and high functionalization; it is used in this work as an organic matrix that, in addition to stabilizing NPs, also acts as a diluent in the functionalization step, decreasing the metal loading on the polypropylene (PP) surface.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!