The highly efficient photovoltaic cells require the In-rich InGaN film with a thickness more than 300 nm to achieve the effective photo⋅electricity energy conversion. However, the InGaN thick films suffer from poor crystalline quality and phase separations by using the conventional low-pressure metal organic chemical vapor deposition (MOCVD). We report on the growth of 0.3-1 μm-thick InGaN films with a specially designed vertical-type high-pressure MOCVD at the pressure up to 2.5 atms. The In incorporation is found to be greatly enhanced at the elevated pressures although the growth temperatures are the same. The phase separations are inhibited when the growth pressure is higher than atmospheric pressure, leading to the improved crystalline quality and better surface morphologies especially for the In-rich InGaN. The InGaN with the thickness of 300 nm is further demonstrated as the active region of solar cells, and the widest photoresponse range from ultraviolet to more than 750 nm is achieved.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11197494 | PMC |
http://dx.doi.org/10.1016/j.fmre.2021.11.024 | DOI Listing |
Fundam Res
May 2023
State Key Laboratory of Artificial Microstructure and Mesoscopic Physics, School of Physics, Peking University, Beijing, China.
The highly efficient photovoltaic cells require the In-rich InGaN film with a thickness more than 300 nm to achieve the effective photo⋅electricity energy conversion. However, the InGaN thick films suffer from poor crystalline quality and phase separations by using the conventional low-pressure metal organic chemical vapor deposition (MOCVD). We report on the growth of 0.
View Article and Find Full Text PDFRSC Adv
May 2020
HySA/Catalysis, Centre for Catalysis Research, Department of Chemical Engineering, University of Cape Town Rondebosch 7701 South Africa.
A simple, modified Metal-Organic Chemical Deposition (MOCD) method for Pt, PtRu and PtCo nanoparticle deposition onto a variety of support materials, including C, SiC, BC, LaB, TiB, TiN and a ceramic/carbon nanofiber, is described. Pt deposition using Pt(acac) as a precursor is shown to occur a mixed solid/liquid/vapour precursor phase which results in a high Pt yield of 90-92% on the support material. Pt and Pt alloy nanoparticles range 1.
View Article and Find Full Text PDFSci Rep
April 2015
Departamento de Física e I3N, Universidade de Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal.
We studied the optical properties of metalorganic chemical vapour deposited (MOCVD) InGaN/GaN multiple quantum wells (MQW) subjected to nitrogen (N) implantation and post-growth annealing treatments. The optical characterization was carried out by means of temperature and excitation density-dependent steady state photoluminescence (PL) spectroscopy, supplemented by room temperature PL excitation (PLE) and PL lifetime (PLL) measurements. The as-grown and as-implanted samples were found to exhibit a single green emission band attributed to localized excitons in the QW, although the N implantation leads to a strong reduction of the PL intensity.
View Article and Find Full Text PDFUltramicroscopy
April 2013
Department of Materials Science and Engineering (MSE), Pohang University of Science and Technology (POSTECH), Pohang 790-784, Republic of Korea.
The effects of growth pressure in metal-organic chemical vapor deposition (MOCVD) on the structural and optical properties of InGaN/GaN multiple-quantum-wells (MQWs) grown on c-plane sapphire substrate were investigated by scanning transmission electron microscopy (STEM), atom probe tomography (APT), Raman spectroscopy and electroluminescence (EL) spectroscopy. As the growth pressure decreased, the growth rate of the InGaN layer increased, leading to a decrease in the frequency of the GaN A1(LO) mode peak and broadening of its full width half maximum (FWHM). The intensity of the EL spectra peaked at a growth pressure of 250 Torr with a narrow FWHM at high forward current.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!