High Isolation MIMO Antenna System for 5G N77/N78/N79 Bands.

Micromachines (Basel)

College of Electrical and Electronic Engineering, Wenzhou University, Wenzhou 325035, China.

Published: May 2024

This paper presents a symmetric dual-band multiple-input multiple-output (MIMO) antenna system tailored for fifth-generation (5G) mobile terminals. Operating within the 5G frequency bands N77/N78 (3.4-3.6 GHz) and N79 (4.8-5.0 GHz), the proposed MIMO system achieves high isolation between adjacent antenna elements through slotting and self-decoupling technologies. Antenna elements are strategically positioned on two frames perpendicular to the smartphone's main board. Each antenna element integrates a rectangular microstrip radiator on the inner frame surface, accompanied by a grounded rectangular ring on the outer frame surface. The feed line, situated atop the main board, connects to an external SMA connector located at the main board's bottom. Measurement results reveal isolations exceeding 20 dB for the lower band and 24 dB for the higher band. The fabricated and tested MIMO antenna system demonstrates excellent agreement between simulation and measurement outcomes.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11205828PMC
http://dx.doi.org/10.3390/mi15060721DOI Listing

Publication Analysis

Top Keywords

mimo antenna
12
antenna system
12
high isolation
8
antenna elements
8
main board
8
frame surface
8
antenna
6
mimo
4
isolation mimo
4
system
4

Similar Publications

This paper presents novel MIMO microstrip patch antennas with dimensions of 40 × 80 × 1.6 mm³ incorporating a decoupling and pattern correction structure (DPCS) designed to mitigate mutual coupling and radiation pattern distortion, operating within 3.6-3.

View Article and Find Full Text PDF

A multipurpose antenna system that can handle a broad area of frequencies is crucial in the effort to build up widespread 5G Internet-of-Things (IoT) networks. For fifth-generation Internet-of-things applications, this research introduces a new multi-band antenna that can operate in the sub-6 GHz band (2-7 GHz), Ku-band (13-17.5 GHz), and millimeter wave band (25-39 GHz).

View Article and Find Full Text PDF

This study presents the design and analysis of a compact 28 GHz MIMO antenna for 5G wireless networks, incorporating simulations, measurements, and machine learning (ML) techniques to optimize its performance. With dimensions of 3.19 λ₀ × 3.

View Article and Find Full Text PDF

In this paper, a miniaturized 2 × 2 MIMO dual-wideband ground radiation antenna targeting Wi-Fi 6/6E/7 standards using 2.4 GHz, 5 GHz, and 6 GHz frequency bands with sufficient antenna performance was designed. The proposed antenna system contains four identical 4 mm × 6 mm antennas of the internal loop type and two identical 6 mm × 6 mm isolators containing lumped LC elements.

View Article and Find Full Text PDF

This study discusses the results of using a regression machine learning technique to improve the performance of 6G applications that use multiple-input multiple-output (MIMO) antennas operating at the terahertz (THz) frequency band. This research evaluates an antenna's performance using various methodologies, such as simulation and RLC equivalent circuit models. The suggested design has a broad bandwidth of 2.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!