Stainless steel grade 430 is a type of soft magnetic electromagnetic material with rapid magnetization and demagnetization properties. Considering the delay phenomenon during operation, this study selected 430 stainless steel as the material and explored various metallurgical methods such as magnetic annealing and the addition of Mo as well as increasing the Si content to investigate the microstructure, mechanical behavior, and magnetic properties of each material, aiming to improve the magnetic properties of 430 stainless steel. Experimental results showed that the four electromagnetic steel materials (430F, 430F-MA, 434, and KM31) had equiaxed grain matrix structures, and excellent tensile and elongation properties were observed for each specimen. Additionally, the magnetic properties of the 430F specimen were similar under the DC and AC-10 Hz conditions. According to the hysteresis curves under different AC frequencies (10, 100, 1000 Hz), both magnetic annealing and the addition of Mo could reduce the Bm, Br, and Hc values of the raw 430F material. Increasing the Si content resulted in a decrease in Hc values and an increase in Bm and Br values.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11205382 | PMC |
| http://dx.doi.org/10.3390/ma17122998 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Accumulation of microplastics in relation to the sediment grain size distribution in seagrass meadows in the coastal areas of Tuticorin, southeast coast of India.
Mar Pollut Bull
January 2025
Suganthi Devadason Marine Research Institute, Tuticorin, Tamil Nadu, India; Manonmaniam Sundaranar University, Abishekapatti, Tirunelveli, Tamil Nadu, India.
This research investigated the relationship between microplastic accumulation and the sediment texture in seagrass meadows across the selected coastal regions of Tuticorin. Sixteen sediment samples were collected by SCUBA divers utilizing a stainless steel grab sampler. Findings indicate significantly elevated microplastic concentrations in seagrass sediments when compared to unvegetated areas.
View Article and Find Full Text PDFMechanochemistry: Unravelling the Impact of Metal Leaching in Organic Synthesis.
ChemSusChem
January 2025
Universita degli study di cagliari, Dipartimento di Scienze Chimiche e Geologiche, Cittadella Universitaria, SS 554 bivio per Sestu, 09042, Monserrato, ITALY.
Solvent-free techniques have gained considerable attention in recent years due to their environmental advantages and potential to enable chemical reactivities beyond the reach of traditional solution-based methods. Mechanochemistry has emerged as a groundbreaking approach to drive sustainable chemical processes. Despite its promise, some challenges still need to be explored, including the overlooked issue of material leaching during grinding, a phenomenon in which components from milling media or reaction vessels, such as stainless steel, unintentionally alter reaction outcomes.
View Article and Find Full Text PDFComparative Histological Assessment of Zinc Oxide Nanoparticles and Low-Power Laser Treatment at 810nm Wavelength on the Recovery of Second-Degree Burn Wounds in Rat Models.
Int J Low Extrem Wounds
January 2025
Laser Physics Department, College of Science for Women, University of Babylon, Hillah, Iraq.
The utilization of zinc oxide nanoparticles is thought to augment wound healing because of their antibacterial characteristics and capacity to stimulate cellular regeneration, especially in instances of minor burn injuries. On the other hand, it has been shown that tissue regeneration is aided by low-power laser therapy via photobiomodulation. Zinc oxide nanoparticles and low-power laser therapy are the two therapeutic modalities that will be compared in this study in order to assess how well they promote healing after burn injury and provide important new information on improved wound care techniques.
View Article and Find Full Text PDFPolyoxometalate-ionic liquids (POM-ILs) - a new type of ionic liquid additive family for lubricants.
RSC Adv
January 2025
Norwegian Tribology Center, Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology (NTNU) Trondheim Norway
The focus on energy efficiency to move towards a more sustainable use of resources has intensified efforts to minimize friction and wear in mechanical systems, which account for 23% of the world's energy consumption. In this study, polyoxometalate ionic liquids (POM-ILs) are introduced as environmentally acceptable lubricant additives, for their potential friction-reducing and anti-wear (AW) properties. These compounds, characterized by their complex structures and tunable properties, have been investigated for their tribological performance across base fluids of varying polarities.
View Article and Find Full Text PDFQuantitative Assessment of Microbial Transmission onto Environmental Surfaces Using Thermoresponsive Gelatin Hydrogels as a Finger Mimetic under In Situ-Mimicking Conditions.
Adv Healthc Mater
January 2025
Laboratory for Biointerfaces, Empa, Swiss Federal Laboratories for Materials and Technology, Lerchenfeldstrasse 5, St. Gallen, 9014, Switzerland.
Surface-mediated transmission of pathogens plays a key role in healthcare-associated infections. However, proper techniques for its quantitative analysis are lacking, making it challenging to develop novel antimicrobial and anti-fouling surfaces to reduce pathogen spread via environmental surfaces. This study demonstrates a gelatin hydrogel-based touch transfer test, the HydroTouch test, to evaluate pathogen transmission on high-touch surfaces under semi-dry conditions.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!