Aerogels have been widely studied in the field of thermal insulation. Herein, we reported a kind of conjugated micropolymer (CMP) aerogel synthesized by 1,3,5-triethynylbenzene and 2-amino-3,5-dibromopyridine. To enhance the flame-retardant property, we composited hydroxyapatite (HAP) nanowires with a CMP aerogel. Transmission electron microscopy (TEM) analysis revealed that HAP nanowires were encapsulated within nanosized CMP tubes. In addition, the thermal conductivity of HAP2-NCMP aerogel was 0.0251 W m K, which possesses good thermal insulation property. In the micro-combustion calorimeter (MCC) test, compared with pure NCMP, the peak heat release rate (pHRR) of HAP2-NCMP decreased from 39.3 to 30.82 W g, approximately 21.6% lower. Furthermore, with the increased addition of hydroxyapatite in the HAP-NCMP composite, the pHRR of HAP3-NCMP decreased by about 37.4%. Besides, NCMP possesses good mechanical properties, with a compressive strength of 117.3 kPa at a strain level of 60%. These findings suggest promising application potential for HAP-NCMP in energy-saving and flame-retardant applications.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acs.langmuir.4c00388 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Anisotropic nanocellulose-based aerogels for radiative cooling.
Int J Biol Macromol
January 2025
College of Mechanical Engineering, Tianjin University of Commerce, Tianjin 300134, PR China. Electronic address:
To this day, energy conservation, emission reduction, and environmental protection continue to be goals pursued by humanity. Passive radiation cooling, as a zero-consumption refrigeration technology, offers substantial opportunities for reducing global energy consumption and carbon dioxide emissions. It is of great significance to develop high-performance passive radiation cooling materials from sustainable materials.
View Article and Find Full Text PDFStudy on the influence of TiO2 nanoparticles on the breakdown voltage of transformer oil under severe cold conditions.
PLoS One
January 2025
College of Electric Power, Inner Mongolia University of Technology, Hohhot, China.
The modified nanoparticles can significantly improve the insulation characteristics of transformer oil. Currently, there is a lack of research on the actual motion state of particles in nanofluid to further understand the micro-mechanism of nanoparticles improving the insulation characteristics of transformer oil. In this study, the nanofluid containing 0.
View Article and Find Full Text PDFIntegrating Aerogel into van der Waals Crystals for a High-Strength Thermal Insulator.
Nano Lett
January 2025
Department of Materials Science and Engineering, Yonsei University, Seoul 03722, Republic of Korea.
Achieving low thermal conductivity and high mechanical strength presents a material design challenge due to intrinsic trade-offs, such as the aerogel's porosity, impeding applications in construction, industry, and aerospace. This study presents a composite that incorporates a silica aerogel within a thermally expanded 2D layered vermiculite matrix. This design overcomes limitations imposed by van der Waals bonding lengths, typically less than 10 Å, which hinder aerogel integration with van der Waals crystals.
View Article and Find Full Text PDFCellulose nanofiber-created air barrier enabling closed-cell foams prepared via oven-drying.
Carbohydr Polym
March 2025
Shanghai Key Laboratory of Regulatory Biology, School of Life Sciences, East China Normal University, Shanghai 200241, PR China. Electronic address:
Cellulose foams are renewable and biodegradable materials that are promising substitutes for plastic foams. However, the scale-up fabrication of cellulose foams is severely hindered by technological complexity and cost- and time-consuming drying processes. Here, we developed a facile and robust method to fabricate cellulose foams via oven-drying following surfactant-assisted mechanical foaming of cellulose nanofibers (CNFs).
View Article and Find Full Text PDFGradient Porous and Carbon Black-Integrated Cellulose Acetate Aerogel for Scalable Radiative Cooling.
Small
January 2025
School of Mechanical Engineering, Korea University, 145 Anam-Ro, Seongbuk-Gu, Seoul, 02841, Republic of Korea.
Passive temperature controls like passive daytime radiative cooling (PDRC)-heating (PDRH), and thermal insulation are essential to meet the growing demand for energy-efficient thermal solutions. When combined with advanced functions like electromagnetic interference shielding, these technologies can significantly enhance scalability. However, existing approaches using single thin films or uniform porous materials face inherent limitations in optimizing versatile functions, while lightweight, insulating aerogels can extend their multifunctionality by manipulating pores and fillers.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!