With the continuous development of wearable electronics, higher requirements are put forward for flexible, detachable, stable output, and long service life power modules. Given the limited capacity of energy storage devices, the integration of energy capture and storage is a viable approach. Here, we present a flexible, wearable, wireless-charging power system that integrates a piezoelectric ultrasonic array harvester (PUAH) with MXene-based solid-state supercapacitors (MSSSs) in a soft wristband format for sustainable applications. The MSSS as the energy storage module is developed by using TiCT nanosheet-loaded inserted finger-like carbon cloth skeletons as electrodes and poly(vinyl alcohol)/HPO gel as electrolytes, with high energy density (58.74 Wh kg) and long cycle life (99.37%, 10,000 cycles). A two-dimensional stretchable piezoelectric array as a wireless-charging module hybridizes high-performance 1-3 composite units with serpentine electrodes, which allows wireless power via ultrasonic waves, with a maximum power density of 1.56 W cm and an output voltage of 20.75 V. The overall PUAH-MSSS wireless energy supply system is 2 mm thick and offers excellent energy conversion/storage performance, cyclic stability, and mechanical flexibility. The results of this project will lay the foundation for the development of next-generation wearable electronics.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsami.4c03143 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
TiO/CoO heterostructure decorated MIL-100(Fe) by atomic layer deposition for enhanced photocatalytic oxygen production.
Dalton Trans
January 2025
College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen, Guangdong 518060, P. R. China.
Efficient separation of photogenerated charge carriers is essential for maximizing the photocatalytic efficiency of semiconductor materials in oxygen evolution reactions (OER). This study presents a novel trimetallic photocatalyst, MIL-100(Fe)/TiO/CoO, synthesized through a facile microwave-assisted hydrothermal method followed by atomic layer deposition (ALD). The porous MIL-100(Fe) serves as a support for the sequential deposition of TiO and CoO layers ALD, which enhances electron-hole pair separation and minimizes their recombination.
View Article and Find Full Text PDFBSA/PEI/GOD modified cellulose nanocrystals for construction of hydrogel-based flexible glucose sensors for sweat detection.
J Mater Chem B
January 2025
School of Chemistry and Materials Science, Ludong University, Key Laboratory of High Performance and Functional Polymer in the Universities of Shandong Province, Collaborative Innovation Center of Shandong Province for High Performance Fibers and Their Composites, Yantai 264025, China.
With the miniaturization, integration and intelligence of sweat electrochemical sensor technology, hydrogel flexible sensors have demonstrated immense potential in the field of real-time and non-invasive personal health monitoring. However, it remains a challenge to integrate excellent mechanical properties, self-healing properties, and electrochemical sensing capabilities into the preparation of hydrogel-based flexible sensors. The utilization of CBPG (cellulose nanocrystals (CNCs)@bovine serum albumin (BSA)@polyethyleneimine (PEI) glucose oxidase (GOD) nanomaterial) as both an enhancing phase and sensor probe within a hydrogel matrix, with poly(vinyl alcohol) (PVA) serving as the primary network constituent, has been proposed as a non-invasive technique for monitoring trace glucose levels in sweat.
View Article and Find Full Text PDFHighly stretchable, conductive, and self-adhesive starch-based hydrogel for high-performance flexible electronic devices.
Carbohydr Polym
March 2025
College of Material, Chemistry and Chemical Engineering, Key Laboratory of Organosilicon Chemistry and Material Technology, Ministry of Education, Key Laboratory of Organosilicon Material Technology, Hangzhou Normal University, Zhejiang Province, Hangzhou 311121, Zhejiang, People's Republic of China. Electronic address:
To achieve the green and sustainable development of environment, biocompatible hydrogels with exceptional ionic conductivity and flexibility are highly desired for intelligent and wearable sensors. However, it remains a great challenge to obtain biopolymer hydrogel-based sensors with high transparency, excellent mechanical properties, and good adhesion ability simultaneously. Herein, starch/polyacrylamide double-network hydrogel is achieved to endow the multifunctionality of traditional hydrogel sensor.
View Article and Find Full Text PDF3D-printed ultra-sensitive strain sensors using biogels prepared from fish gelatin and gellan gum.
Carbohydr Polym
March 2025
Engineering Research Centre of Fujian-Taiwan Special Marine Food Processing and Nutrition (Ministry of Education), Fujian Agriculture and Forestry University, Fuzhou 350002, China; College of Food Science, Fujian Agriculture and Forestry University, Fuzhou 350002, PR China; China-Ireland International Cooperation Centre for Food Material Science and Structural Design, Fuzhou 350002, China. Electronic address:
The long-term sustainable development of flexible electronic devices is limited by a reliance on synthetic polymers that pose dangers for humans and potentially severe ecological problems, as well as a reliance on conventional processing methods. This work aims to exploit 3D printing to develop natural biogels composed of fish gelatin and high acyl gellan gum for use as flexible sensors. The electrical conductivity and mechanical strength were remarkably enhanced through the environmentally friendly enzyme (transglutaminase) cross-linking and non-toxic ethanol modification treatment, which allows the development of 3D printed sensors for temperature, strain, and stress sensors.
View Article and Find Full Text PDFpH-Regulated catechol-modified sodium alginate hydrogel with anti-freezing and high toughness for wearable strain sensor.
Int J Biol Macromol
January 2025
School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China. Electronic address:
Hydrogel-based flexible electronic devices have garnered significant attention due to their excellent mechanical properties, high electrical conductivity, and signal sensitivity. Nevertheless, internal water molecules crystallize inevitably at low temperatures, impairing the performance of hydrogels. Designing anti-freezing and tough hydrogels to meet long-term stability requirements is extremely challenging.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!