A novel multi-longitudinal mode 532 nm photonic Doppler velocimetry (PDV) was proposed to solve the problem of high bandwidth requirements in shock experiments with velocities up to km/s. Compared to the conventional PDV system operating at 1550 nm, the utilization of a shorter wavelength of 532 nm enables nearly three times the velocity resolution. However, it also leads to a threefold increase in the Doppler frequency shift for a given velocity. To mitigate the bandwidth constraints, a multi-longitudinal mode laser is employed to downconvert the signal, effectively reducing the bandwidth requirements. The efficacy of this method is validated through theoretical analysis and experimental investigations on detonation shock scenarios. Furthermore, this approach eliminates the necessity for modulators, frequency shifters, and other devices, facilitating its applicability to non-communication bands.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1063/5.0200557 | DOI Listing |
In this work, a novel 2.7 µm source used for CO and HO vapor spectroscopy using the backward propagating wave of a backward wave optical parametric oscillator (BWOPO) is demonstrated for the first time to our knowledge. The unique properties of BWOPOs eliminate the need for additional spectral narrowing or wavelength stabilization, enabling the use of a multi-longitudinal mode Q-switched pump laser centered around 1030 nm.
View Article and Find Full Text PDFRev Sci Instrum
June 2024
Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900, China.
A novel multi-longitudinal mode 532 nm photonic Doppler velocimetry (PDV) was proposed to solve the problem of high bandwidth requirements in shock experiments with velocities up to km/s. Compared to the conventional PDV system operating at 1550 nm, the utilization of a shorter wavelength of 532 nm enables nearly three times the velocity resolution. However, it also leads to a threefold increase in the Doppler frequency shift for a given velocity.
View Article and Find Full Text PDFA method by detecting the ellipse fitting degree of the trajectory equation formed by two self-mixing (SM) signals in the multi-longitudinal mode laser SM system with a Wollaston prism is presented to test the free spectral range (FSR) of the laser. By utilizing the orthogonal vector and phase-shift characteristics between adjacent longitudinal modes, the fluctuations in multi-mode SM effects caused by changes in the external cavity length are transformed into alterations in the trajectory composed of two orthogonal SM signals. The FSR is calculated by detecting the difference in external cavity lengths between the two positions, where the trajectory of the two SM signals best fits an ellipse.
View Article and Find Full Text PDFAnalyzing the longitudinal-mode of a pump can significantly prevent optical damage to solid media and expand the applications of solid media in high repetition rate stimulated Brillouin scattering (SBS). In this study, a Fabry-Pérot etalon was used to control the number of longitudinal-mode in a pump laser output. We studied the output characteristics of SBS in fused silica by considering both single- and multi-longitudinal-mode pumping.
View Article and Find Full Text PDFA multi-longitudinal mode (MLM) laser beat-frequency optical fiber vibration sensor using a frequency modulation (FM) radio integrated circuit module as the FM demodulation scheme is presented and demonstrated. To the best of our knowledge, this is the first case where a fiber-optic sensing system is combined with an FM radio module, and dynamic sensing is well achieved. As the carrier of the vibration source, the beat-frequency signal (BFS) generated by the MLM laser is transmitted to the FM radio module for FM and demodulation.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!