The application of polyesters as food contact materials is an alternative to epoxy resin coatings, which can be a source of endocrine migrants. By using high-pressure liquid chromatography/electrospray ionization-mass spectrometry (HPLC/ESI-MS) with cone voltage-induced fragmentation in-source, a number of polyester-derived migrants were detected in the extracts of inner coatings of metallic cans. The polyester-derived migrants were detected in each inner coating of fish product-containing cans (5/5) and in one inner coating of meat product-containing can (1/5). They were not detected in the inner coatings of vegetable/fruit product-containing cans (10 samples). The respective detected parent and product ions enabled differentiation between cyclic and linear compounds, as well as unambiguous identification of diol and diacid units. Most of the detected compounds, cyclic and linear, were composed of neopentyl glycol as diol and two diacid comonomers, namely isophthalic acid and hexahydrophthalic acid. The other detected oligoesters were composed of neopentyl glycol or propylene glycol and adipic acid/isophthalic acid as comonomers. The compounds containing propylene glycol as diol were found to be exclusively linear cooligoesters. On the basis of abundances of [M+Na] ions, the relative contents of cyclic and linear oligoesters were evaluated.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11173705PMC
http://dx.doi.org/10.3390/ma17112771DOI Listing

Publication Analysis

Top Keywords

inner coatings
12
cyclic linear
12
coatings metallic
8
metallic cans
8
high-pressure liquid
8
cone voltage-induced
8
voltage-induced fragmentation
8
polyester-derived migrants
8
migrants detected
8
detected inner
8

Similar Publications

As an exceptional 2D nanofiller, graphene oxide (GO) is extensively employed to amplify the protective properties of coatings. The dispersion of GO significantly influences the protective efficacy of the coatings. Here, a surface modification of GO through the integration of nanosized titanium dioxide (TiO) was employed, thereby facilitating the synthesis of an FGO-TiO nanoparticle characterized by a substantial interlayer spacing (0.

View Article and Find Full Text PDF

Oxygen, light, and mechanical force mediated radical polymerization toward precision polymer synthesis.

Chem Commun (Camb)

January 2025

State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai 200438, China.

The synthesis of polymers with well-defined composition, architecture, and functionality has long been a focal area of research in the field of polymer chemistry. The advancement of controlled radical polymerization (CRP) has facilitated the synthesis of precise polymers, which are endowed with new properties and functionalities, thereby exhibiting a wide range of applications. However, radical polymerization faces several challenges, such as oxygen intolerance, and common thermal initiation methods may lead to side reactions and depolymerization.

View Article and Find Full Text PDF

Functionally Graded Oxide Scale on (Hf,Zr,Ti)B Coating with Exceptional Ablation Resistance Induced by Unique Ti Dissolving.

Adv Sci (Weinh)

January 2025

Shaanxi Key Laboratory of Fiber Reinforced Light-Weight Composites, State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an, 710072, China.

Multicomponent Ti-containing ultra-high temperature ceramics (UHTCs) have emerged as more promising ablation-resistant materials than typical UHTCs for applications above 2000 °C. However, the underlying mechanism of Ti improving the ablation performance is still obscure. Here, (Hf,Zr,Ti)B coatings are fabricated by supersonic atmospheric plasma spraying, and the effects of Ti content on the ablation performance under an oxyacetylene flame are investigated.

View Article and Find Full Text PDF

Combustion of biomass and waste results in release of corrosive species, such as alkali chlorides and water vapor, which accelerate the corrosion of superheaters in the boiler. To improve our understanding of alkali-induced corrosion, long-term corrosion investigations are needed. This study utilizes a systematic approach based on long-term corrosion studies (up to 8000 h) in a well-controlled laboratory environment to understand the corrosion behavior and protectiveness of oxide scales formed on a FeCr alloy (marginal chromia former) and three overlay weld coating systems (lean FeCrAl, FeCrAl, and Ni-based alloy) in a KCl-rich environment at 600 °C.

View Article and Find Full Text PDF

Background/purpose: Titanium (Ti) is extensively used in dental and orthopedic implants due to its excellent mechanical properties. However, its smooth and biologically inert surface does not support the ingrowth of new bone, and Ti ions may have adverse biological effects. The purpose is to improve the corrosion resistance of titanium and create a 3D structured coating to enhance osseointegration through a very simple and fast surface treatment.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!