Effective degradation of tetracycline in aqueous solution by an electro-Fenton process using chemically modified carbon/α-FeOOH as catalyst.

This study applied an electro-Fenton process using chemically modified activated carbon derived from rubber seed shells loaded with α-FeOOH (RSCF) as catalyst to remove tetracycline residues from aquatic environment. Catalyst characteristics were evaluated using SEM, EDS, XRD, and XPS, showing successful insertion of iron onto the activated carbon. The effects of the parameters were investigated, and the highest treatment efficiency was achieved at pH of 3, Fe: HO ratio (w/w) of 500:1, catalyst dose of 1 g/L, initial TCH concentration of 100 mg/L, and electric current of 150 mA, with more than 90% of TCH being eliminated within 30 min. Furthermore, even after five cycles of use, the treatment efficiency remains above 90%. The rate constant is calculated to be 0.218 min, with high regression coefficients (  = 0.93). The activation energy (E) was found to be 32.2 kJ/mol, indicating that the degradation of TCH was a simple reaction with a low activation energy. These findings showed that the RSCF is a highly efficient and cost-effective catalyst for TCH degradation. Moreover, the use of e-Fenton process has the advantage of high efficiency, low cost thanks to the recyclability of the catalyst, and environmental friendliness thanks to less use of HO.