AI Article Synopsis
- Photon management is essential for enhancing the efficiency of perovskite thin film (PTF) solar cells.
- A new design featuring a nano-cone (NC) based 2D photonic nanostructure has been simulated to improve light trapping through better light scattering and interference in the active layer of solar cells.
- The NC nanostructured device shows a 20% increase in short-circuit current density, from 15.00 mA/cm to 18.09 mA/cm, suggesting a promising approach for future developments in perovskite solar cell technology.
Article Abstract
Photon management strategies are crucial to improve the efficiency of perovskite thin film (PTF) solar cell. In this work, a nano-cone (NC) based 2D photonic nanostructure is designed and simulated aiming at achieve superior light trapping performance by introducing strong light scattering and interferences within perovskite active layer. Compared to the planar PTF solar cell, the NC nanostructured device with 45 degrees half apex angle obtains highest short-circuit current density, which improved over 20% from 15.00 mA/cm to 18.09 mA/cm. This work offers an alternative design towards effective light trapping performance using 2D photonic nanostructure for PTF solar cell and could potentially be adopted as the nano-structuring strategy for the future perovskite solar cell industry.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11166984 | PMC |
| http://dx.doi.org/10.1038/s41598-024-56424-4 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Optimizing CsCuBiBr double halide perovskite for solar applications: the role of electron transport layers in SCAPS-1D simulations.
RSC Adv
January 2025
Department of Electrical and Electronic Engineering, International Islamic University Chittagong Kumira Chittagong 4318 Bangladesh
Perovskite solar cells are commonly employed in photovoltaic systems because of their special characteristics. Perovskite solar cells remain efficient, but lead-based absorbers are dangerous, restricting their manufacture. Therefore, studies in the field of perovskite materials are now focusing on investigating lead-free perovskites.
View Article and Find Full Text PDFDirect Synthesis of Hydrogen-Substituted Graphdiyne on Fluorine-Doped Tin Oxide Glass Substrates Using a Cu Sandwich Technique.
Langmuir
January 2025
Surface Science Laboratory, Graduate School of Engineering, Toyota Technological Institute, 2-12-1, Hisakata, Tempaku, Nagoya, Aichi 468-8511, Japan.
Hydrogen-substituted graphdiyne (HsGDY) is a two-dimensional material with an sp-sp carbon skeleton featuring a band gap and a porous structure that enhances ion diffusion. In previous reports, HsGDY growth was limited to metal substrates such as Cu, which then required transfer. Here, we developed a sandwich method that allows HsGDY to be grown directly on the target substrate.
View Article and Find Full Text PDFSquaric Acid-Containing Hole-Collecting Monolayer Materials for p-i-n Perovskite Solar Cells.
ACS Appl Mater Interfaces
January 2025
Institute for Chemical Research, Kyoto University, Gokasho, Uji, Kyoto 611-0011, Japan.
The development of hole-collecting materials is indispensable to improving the performance of perovskite solar cells (PSCs). To date, several anchorable molecules have been reported as effective hole-collecting monolayer (HCM) materials for p-i-n PSCs. However, their structures are limited to well-known electron-donating skeletons, such as carbazole, triarylamine, etc.
View Article and Find Full Text PDFMechanically robust and stretchable organic solar cells plasticized by small-molecule acceptors.
Science
January 2025
Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, China.
Emerging wearable devices would benefit from integrating ductile photovoltaic light-harvesting power sources. In this work, we report a small-molecule acceptor (SMA), also known as a non-fullerene acceptor (NFA), designed for stretchable organic solar cell (-OSC) blends with large mechanical compliance and performance. Blends of the organosilane-functionalized SMA BTP-Si4 with the polymer donor PNTB6-Cl achieved a power conversion efficiency (PCE) of >16% and ultimate strain (ε) of >95%.
View Article and Find Full Text PDFWhy SbSe/CdS Interface Produces Higher Power Conversion Efficiency.
J Phys Chem Lett
January 2025
College of Physics Science and Technology, Hebei University, Baoding 071002, China.
Developing the Cd-free electron transport layer (ETL) is a crucial subject in the field of antimony selenide (SbSe) solar cells. At present, the power conversion efficiency (PCE) of the Cd-free SbSe solar cell is still substantially lower than that of CdS-based devices. It is significant to reveal the electron transfer features in SbSe/CdS heterojunction and SbSe/Cd-free ETL heterojunction for development of a Cd-free SbSe solar cell with high PCE.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!