Aqueous zinc batteries are practically promising for large-scale energy storage because of cost-effectiveness and safety. However, application is limited because of an absence of economical electrolytes to stabilize both the cathode and anode. Here, we report a facile method for advanced zinc-iodine batteries via addition of a trace imidazolium-based additive to a cost-effective zinc sulfate electrolyte, which bonds with polyiodides to boost anti-self-discharge performance and cycling stability. Additive aggregation at the cathode improves the rate capacity by boosting the I conversion kinetics. Also, the introduced additive enhances the reversibility of the zinc anode by adjusting Zn deposition. The zinc-iodine pouch cell, therefore, exhibits industrial-level performance evidenced by a ∼99.98% Coulombic efficiency under ca. 0.4C, a significantly low self-discharge rate with 11.7% capacity loss per month, a long lifespan with 88.3% of initial capacity after 5000 cycles at a 68.3% zinc depth-of-discharge, and fast-charging of ca. 6.7C at a high active-mass loading >15 mg cm. Highly significant is that this self-discharge surpasses commercial nickel-metal hydride batteries and is comparable with commercial lead-acid batteries, together with the fact that the lifespan is over 10 times greater than reported works, and the fast-charging performance is better than commercial lithium-ion batteries.

Download full-text PDF

Source
http://dx.doi.org/10.1021/jacs.4c03518DOI Listing

Publication Analysis

Top Keywords

zinc-iodine pouch
8
low self-discharge
8
batteries
5
aqueous zinc-iodine
4
pouch cells
4
cells long
4
long cycling
4
cycling life
4
life low
4
self-discharge aqueous
4

Similar Publications

Polymeric Iodine Transport Layer Enabled High Areal Capacity Dual Plating Zinc-Iodine Battery.

Angew Chem Int Ed Engl

November 2024

School of Chemistry, Engineering Research Center of Energy Storage Materials and Devices, Ministry of Education, National Innovation Platform (Center) for Industry-Education Integration of Energy Storage Technology, Xi'an Jiaotong University, Xi'an.

Article Synopsis
  • - The research focuses on improving the performance of iodine cathodes in zinc-iodine batteries, which are known for their high energy density and safety, through the use of a PVA-hydrogel layer to overcome iodine's low conductivity.
  • - The introduction of the PVA-hydrogel layer significantly boosts the specific capacity of the cathode, demonstrating double the capacity of a pure CNT film in dual-plating cells due to enhanced iodine transport and reduced shuttle effect.
  • - Experimental methods including Raman spectroscopy and optical micrography were used to reveal that strong interactions between PVA chains and polyiodide anions facilitate fast transport and stability, leading to pouch cells with excellent performance and longer cycle life.
View Article and Find Full Text PDF

Iodine/Chlorine Multi-Electron Conversion Realizes High Energy Density Zinc-Iodine Batteries.

Adv Sci (Weinh)

November 2024

College of Environment and Chemical Engineering, Hebei Key Laboratory of Applied Chemistry, State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao, 066004, P. R. China.

Aqueous zinc-iodine (Zn-I) batteries are promising energy storage devices; however, the conventional single-electron reaction potential and energy density of iodine cathode are inadequate for practical applications. Activation of high-valence iodine cathode reactions has evoked a compelling direction to developing high-voltage zinc-iodine batteries. Herein, ethylene glycol (EG) is proposed as a co-solvent in a water-in-deep eutectic solvent (WiDES) electrolyte, enabling significant utilization of two-electron-transfer I/I/I reactions and facilitating an additional reversibility of Cl/Cl redox reaction.

View Article and Find Full Text PDF

Zinc-iodine (Zn-I) batteries are gaining popularity due to cost-effectiveness and ease of manufacturing. However, challenges like polyiodide shuttle effect and Zn dendrite growth hinder their practical application. Here, we report a cation exchange membrane to simultaneously prevent the polyiodide shuttle effect and regulate Zn deposition.

View Article and Find Full Text PDF

Aqueous zinc-iodine (Zn-I) batteries hold potential for large-scale energy storage but struggle with shuttle effects of I cathodes and poor reversibility of Zn anodes. Here, an interfacial gelation strategy is proposed to suppress the shuttle effects and improve the Zn reversibility simultaneously by introducing silk protein (SP) additive. The SP can migrate bidirectionally toward cathode and anode interfaces driven by the periodically switched electric field direction during charging/discharging.

View Article and Find Full Text PDF

Aqueous Zinc-Iodine Pouch Cells with Long Cycling Life and Low Self-Discharge.

J Am Chem Soc

June 2024

School of Chemical Engineering, The University of Adelaide, Adelaide, South Australia 5005, Australia.

Aqueous zinc batteries are practically promising for large-scale energy storage because of cost-effectiveness and safety. However, application is limited because of an absence of economical electrolytes to stabilize both the cathode and anode. Here, we report a facile method for advanced zinc-iodine batteries via addition of a trace imidazolium-based additive to a cost-effective zinc sulfate electrolyte, which bonds with polyiodides to boost anti-self-discharge performance and cycling stability.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!