InP Crystal Phase Heterojunction Transistor with a Vertical Gate-All-Around Structure.

ACS Appl Mater Interfaces

Graduate School of Information Science and Technology, Hokkaido University, North 14 West 9, Sapporo 060-0814, Japan.

Published: June 2024

Crystal phase transitions can form a new type of heterojunction with different atomic arrangements in the same material: crystal phase heterojunction (CPHJ). The CPHJ has an inherently strong impact on band engineering without concerns over critical thicknesses with misfit dislocations and a semiconductor-metal transition. In-plane CPHJ was recently demonstrated in two-dimensional (2D) transition-metal dichalcogenide (TMD) materials and utilized for conventional planar field-effect transistor applications. However, scalability such as gate electrostatic control, miniaturization, and multigate structure have been limited because of the geometrical issue. Here, we demonstrated a transistor using the CPHJ with a vertical gate-all-around structure by forming a CPHJ in conventional III-V semiconductors. The CPHJ, composed of wurtzite InP nanowires with zincblende InP substrates, showed an atomically flat heterojunction without dislocations and indicated a Type-II band discontinuity across the junction. The CPHJ transistor had moderate to good gate electrostatic controllability with high on-state currents and transconductance. The CPHJ offer will provide a new switching mechanism and add a new junction and device design choice to the long history of transistors.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11182027PMC
http://dx.doi.org/10.1021/acsami.4c00147DOI Listing

Publication Analysis

Top Keywords

crystal phase
12
phase heterojunction
8
vertical gate-all-around
8
gate-all-around structure
8
cphj
8
gate electrostatic
8
inp crystal
4
heterojunction
4
transistor
4
heterojunction transistor
4

Similar Publications

Electrically conductive coordination polymers (ECCPs), particularly those incorporating benzenehexathiol (BHT) ligands, are emerging as a distinctive class of electronic materials with tunable semiconducting and metallic properties. However, the exploration of novel ECCPs with low-symmetry structures and electrical anisotropy remains under development. Here, we report the on-water surface synthesis of a novel ECCP, namely Cu5BHT, which exhibits a low-symmetry structure and unique in-plane electrical anisotropy that differs from the well-known Cu3BHT phase.

View Article and Find Full Text PDF

Efficient circularly polarized luminescence (CPL) optical waveguides have significant potential for advancing photonic and optoelectronic devices. However, the development of CPL optical waveguides materials (OWMs) with low optical loss coefficient remains a considerable challenge. To overcome this, we design and synthesize CPL OWMs based on room-temperature phosphorescent liquid crystalline polymers (LCPs).

View Article and Find Full Text PDF

Chemical corrosion resistance mechanism of titanium alloy radiation rods with self-protected structure.

Ultrason Sonochem

January 2025

State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University, Changsha 410083, China; Light Alloy Research Institute, Central South University, Changsha 410083, China.

The chemical corrosion of the TC4 radiation rod surface (TRRS) during the ultrasonic casting process has the potential to significantly impair the smooth conduction of ultrasonic waves. However, in the later stages of corrosion, a self-protected structure (TSPS) emerges under the ultrasonic cavitation effect, which serves to impede the chemical corrosion of the TRRS and markedly reduce the rate of mass loss of the radiation rod. This ensures the smooth ultrasonic conduction of the radiation rod during operation.

View Article and Find Full Text PDF

Using angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT), an experimental and theoretical study of changes in the electronic structure (dispersion dependencies) and corresponding modification of the energy band gap at the Dirac point (DP) for topological insulator (TI) [Formula: see text] have been carried out with gradual replacement of magnetic Mn atoms by non-magnetic Ge atoms when concentration of the latter was varied from 10% to 75%. It was shown that when Ge concentration increases, the bulk band gap decreases and reaches zero plateau in the concentration range of 45-60% while trivial surface states (TrSS) are present and exhibit an energy splitting of 100 and 70 meV in different types of measurements. It was also shown that TSS disappear from the measured band dispersions at a Ge concentration of about 40%.

View Article and Find Full Text PDF

The preparation of new phosphor with outstanding luminescent properties for white light-emitting diodes (WLEDs) is consistently a challenging. Here in the present study, A novel white-emitting chloropatite phosphor Ca(PO)Cl:Eu was synthesized via the pechini sol gel synthesis with citric acid and polyethylene glycol (PEG) acid as a fuel at 850 °C systematically investigating the impact of doping concentration and synthesis temperature on both photoluminescence properties and crystal phase. The structural characteristics and crystalline nature of the prepared sample were investigated by using X-ray diffraction (XRD) patterns and Fourier transform infrared (FT-IR) spectra.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!