Various hazardous volatile organic compounds (VOCs) are frequently released into environments during accidental events that cause many hazards to ecosystems and humans. Therefore, rapid, sensitive, and on-site detection of hazardous VOCs is crucial to understand their compositions, characteristics, and distributions in complex environments. However, manual handling of hazardous VOCs remains a challenging task, because of the inaccessible environments and health risk. In this work, we designed a quadruped robotic sampler to reach different complex environments for capturing trace hazardous VOCs using a needle trap device (NTD) by remote manipulation. The captured samples were rapidly identified by portable mass spectrometry (MS) within minutes. Rapid detection of various hazardous VOCs including toxicants, chemical warfare agents, and burning materials from different environments was successfully achieved using this robot-MS system. On-site detection of 83 typical hazardous VOCs was examined. Acceptable analytical performances including low detection limits (at subng/mL level), good reproducibility (relative standard deviation (RSD) < 20%, = 6), excellent quantitative ability ( > 0.99), and detection speed (within minutes) were also obtained. Our results show that the robot-MS system has excellent performance including safety, controllability, applicability, and robustness under dangerous chemical conditions.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acs.analchem.4c01555 | DOI Listing |
J Hazard Mater
January 2025
Key Laboratory of Odor Pollution Control, Ministry of Ecology and Environment, Tianjin Academy of Eco-environmental Sciences, Tianjin 300191, China; Tianjin Sinodour Environmental Technology Co., Ltd., Tianjin 300191, China.
The rubber product manufacturing (RPM) industry generates a large number of odor complaints because persistent and distinctive volatile compounds are released during the associated processes. Such compounds represent a nuisance and may pose health risks to nearby residents. Extensive monitoring and sampling identified 146 volatile organic compounds (VOCs) from 20 enterprises across 6 subcategories of the RPM industry.
View Article and Find Full Text PDFEnviron Res
January 2025
Department of Environmental Engineering, Chungbuk National University, Cheongju, Chungbuk 28644, Republic of Korea. Electronic address:
Volatile organic compounds (VOCs), such as toluene, are hazardous air pollutants that pose significant health and environmental risks. This study addresses remediation of toluene by developing a bifunctional nitrogen-doped biochar (NDB) activated with sodium hydroxide (NaOH), aimed at reducing toluene emissions through both adsorption and catalytic oxidation. A series of NDB samples were prepared via NaOH activation and pyrolysis at varying temperatures to optimize their adsorption capacity and catalytic performance.
View Article and Find Full Text PDFJ Hazard Mater
January 2025
School of Metallurgy and Environment, Central South University, Chinese National Engineering Research Center for Control and Treatment of Heavy Metal Pollution, Changsha 410083, China; School of Environment and Energy, South China University of Technology, the Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), Guangdong Engineering and Technology Research Center for Environmental Nanomaterials, Guangzhou 510006, China.
The reactions at the mineral-solution interface govern whether heavy metals (HMs) ions are retained within minerals or migrate with the solution, thus influencing their cycling and fate. However, the mechanisms driving this differential behavior of HMs at the interface remain poorly understood. In this study, we present a novel paradigm for the selective retention of HMs ions at the mineral-solution interface.
View Article and Find Full Text PDFPhys Chem Chem Phys
January 2025
Radiochemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai-400085, India.
The precise identification of various toxic gases is important to prevent health and environmental hazards using cost-effective, efficient, metal oxide-based chemiresistive sensing methods. This study explores the sensing properties of a chemiresistive sensor based on a ZnSnO-SnO microcomposite for detecting -butanol vapours. The microcomposite, enriched with oxygen vacancies, was thoroughly characterized, confirming its structure, crystallinity, morphology and elemental composition.
View Article and Find Full Text PDFChina CDC Wkly
December 2024
National Center for Occupational Safety and Health, NHC, Beijing, China.
Introduction: Pneumoconiosis represents the most prevalent occupational disease in China, with coal workers' pneumoconiosis (CWP) showing the highest incidence. Analysis of volatile organic compounds (VOCs) in the exhaled breath of CWP patients may provide novel insights into its pathogenesis.
Methods: Study data were collected through questionnaires and medical examinations.
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!