Developed and Validated for the Estimation of Bupropion and Dextromethorphan in a Fixed Dose Combination of the Tablet.

Objectives: The aim of this study was to develop a simple, accurate, and precise method for the estimation of bupropion and dextromethorphan in a fixed-dose combination of tablets and robust high-performance liquid chromatography for assay analysis of such a fixed combination.

Materials And Methods: Chromatographic analysis was performed and separations were achieved on a Denali C18 150 × 4.6 mm, 5 micron using a mobile phase composition of acid and acetonitrile in the ratio of 600:400 (), flow rate of 1.0 mL/min, injection volume is 10 µL and run time of 6 min in isocratic elution. Ultraviolet (UV) detection was performed at a wavelength of 221 nm. The temperature was maintained at 30 °C. Well-resolved peaks were observed with a high number of theoretical plates, lower tailing factor, and reproducible relative retention time. The method was validated, and all validation parameters were found to be within the acceptance limits.

Results: A simple, accurate, and precise method has been developed for estimating bupropion and dextromethorphan in a fixed dose combination of tablets. The optimized method included the following parameters: column temperature of 30 °C, 40% acetonitrile as the mobile phase, and flow rate of 1.0 mL/min. Retention times were 2.25 min and 3.12 min for bupropion and dextromethorphan, respectively. The method was found to be linear in the range of 17.5-105 µg/mL [for R < 0.999) and 7.5-45 µg/mL (for R > 0.999] for bupropion and dextromethorphan, respectively. Both active pharmaceutical ingredients dissolved more than 90% within 5 min.

Conclusion: The current study describes a new, simple, reliable, and economical elution reversed-phase high performance liquid chromatography method for estimating bupropion and dextromethorphan in a fixed combination tablet dosage form. The forced degradation studies were conducted using several degradation conditions such as acidic, alkali, oxidation, thermal, UV, and neutral conditions; the proposed method was effectively employed from the resolution of sample peaks. To the best of our knowledge, no such detailed and stability-indicating method has been reported for a fixed tablet dosage form.