Adsorption of Asphaltenes at Model Oil/Brine Interface: Influence of Solvent Polarity.

With the exploitation of heavy oil worldwide, the influence of asphaltene aggregation in the oil phase on the stability of crude oil emulsion has been paid more and more attention. Under this background, the effects of solvent polarity on model oil/brine water interfacial properties and emulsion stability are investigated in this study. It is demonstrated that there is a critical asphaltene concentration for the formation of a stable emulsion. This critical concentration is then found to increase from 80 to 500 ppm with the mixing ratio of methylnaphthalene to -decane changed from 2:3 to 7:3. The dynamic light scattering experiment shows that the average aggregate size increases abruptly from 132.8 to 261.1 nm at 2:3 mixing ratio of methylnaphthalene to -decane once the asphaltenes are added to above the critical concentration. Accordingly, the diffusion coefficient of the asphaltenes decreases sharply from 4.36 × 10 to 5.68 × 10 m/s. Similar conclusions are also found for the other mixing ratios of 1:1, 3:2, and 7:3. Besides, the aggregation degree of asphaltenes weakens, and the diffusion coefficient enlarges at the same asphaltene concentration with the enhancement of the solvent polarity. Further, the interfacial experiments manifest that the equilibrium interfacial dilation modulus decreases from 38.42 to 23.65 mN/m with the mixing ratio of methylnaphthalene to -decane increased from 2:3 to 7:3. It can thus be inferred that the structural strength of the interfacial film decreases with the enhancement of the solvent polarity.