Validation of the Elekta iBEAM Evo couchtop modeling in the Monaco treatment planning system.

Recently, carbon fiber (CF) has prevailed as the primary material used in radiotherapy couchtops. Modern couchtops incorporate the CF sandwich design, in which 2 thin CF plates sandwich an air-equivalent polymeric foam. Developments in radiotherapy necessitate irradiation from posterior angles through the couchtop. However, the presence of the couchtop needs proper modeling in the treatment planning system (TPS) due to attenuation; otherwise, the tumor dose is reduced. In the current study, an effort was made with the intent of finding the optimum electron density (ED) values for Elekta's iBEAM Evo couchtop components (CF and Foam Core (FC)) for its proper modeling in Monaco TPS. Also, the attenuation of the beam due to the couchtop's presence was investigated. A cylindrical phantom with an ionization chamber positioned at the isocenter was utilized for the measurements. The phantom was placed centrally on the iBEAM Evo couchtop and was irradiated with an Elekta Infinity linear accelerator's 6, 10, and 15 MV photon beams. The gantry angle was set at 0 and from 120 to 180 with an increment of 10. The same procedure was designed and followed in Monaco TPS. Measured and calculated dose values were compared by calculating percentage deviation (PD). Attenuation has also been calculated using the measurements of the experimental setup and the Monaco calculations. The values of ED that provided the optimum agreement between measured and Monaco-calculated dose values while minimizing PD were 0.55 g/cm for CF, and 0.1 g/cm for FC. The maximum values of PD for the beams of 6, 10, and 15 MV were -0.62%, +1,78%, and +2.35%, respectively, for a 5 × 5 cm field size. Furthermore, Monaco predicted attenuation from 1.83% to 6.26% (calculated values), while from the measurements, an attenuation from 1.44% to 5.75% (measured values) regarding the posterior angles was found. Thus, good agreement was verified between the TPS calculations and experimental measurements. Elekta's iBEAM Evo couchtop modeling was successfully validated in Monaco TPS. The couchtop's presence alters the patient's dose regarding irradiation from the posterior angles. Due to the attenuation of the beam, proper incorporation, modeling, and validation of the couchtop are necessary to improve the radiotherapy outcome and ensure that each patient receives the optimal treatment.