Ultrasonic treatment has been widely used in the mineral flotation process due to its advantages in terms of operational simplicity, no secondary pollutant formation, and safety. Currently, many studies have reported the effect of ultrasonic treatment on mineral flotation and shown excellent flotation performance. In this review, the ultrasonic mechanisms are classified into three types: the transient cavitation effect, stable cavitation effect, and acoustic radiation force effect. The effect of the main ultrasonic parameters, including ultrasonic power and ultrasonic frequency, on mineral flotation are discussed. This review highlights the uses of the application of ultrasonic treatment in minerals (such as the cleaning effect, ultrasonic corrosion, and desulfuration), flotation agents (such as dispersion and emulsification and change in properties and microstructure of pharmaceutical solution), and slurry (such formation of microbubbles and coalescence). Additionally, this review discusses the challenges and prospects of using ultrasonic approaches for mineral flotation. The findings demonstrate that the application of the ultrasonic effect yields diverse impacts on flotation, thereby enabling the regulation of flotation behavior through various treatment methods to enhance flotation indices and achieve the desired objectives.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11085708 | PMC |
http://dx.doi.org/10.3390/molecules29091984 | DOI Listing |
Langmuir
January 2025
State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Yunnan Key Laboratory of Green Separation and Enrichment of Strategic Mineral Resources, Faculty of Land Resources Engineering, Kunming University of Science and Technology, Kunming 650093, China.
The accumulation of phosphogypsum (PG) in the phosphorus chemical industry poses significant environmental challenges. Therefore, developing a harmless utilization method is crucial for alleviating these burdens and promoting sustainable industry practices. In this study, PG was used as a flotation inhibitor, enabling the flotation separation of apatite and dolomite based on the main components and dissolution behavior of PG.
View Article and Find Full Text PDFPolymers (Basel)
January 2025
Advanced Mining Technology Center (AMTC), Universidad de Antofagasta, Antofagasta 1240000, Chile.
Brucite (Mg(OH)) is a typical precipitate in the mining industry that adversely affects processes such as flotation and thickening. Gaining insights into the physicochemical properties of this mineral is critical for developing strategies to mitigate these challenges and improve operational efficiency. Additionally, incorporating natural-origin polymers aligns with the shift toward more sustainable mining practices.
View Article and Find Full Text PDFLangmuir
January 2025
Key Laboratory of Green Utilization of Critical Non-Metallic Mineral Resources of Ministry of Education, Wuhan University of Technology, Wuhan 430070, China.
Reverse flotation separation of muscovite from apatite using a dodecylpyridinium chloride (DPDC) ionic liquid as the collector was studied in this work. The microflotation results depicted that DPDC had a strong collecting for muscovite but had a slight collecting for apatite when using phosphoric acid as a depressant for apatite in a weakly acidic pH value pulp, artificial mixture mineral flotation showed that reverse flotation separation of muscovite from apatite can be effectively achieved in the reagent scheme of phosphoric acid/DPDC, and DPDC had a better separation performance in the muscovite/apatite system than DDA. The adsorption measurements indicated that the adsorption amount of DPDC on the apatite surface was less than that of DPDC on the muscovite surface, and the zeta potential results confirmed that a strong interaction occurred between DPDC and the muscovite surface, while an extremely weak interaction occurred between DPDC and the apatite surface in the presence of phosphoric acid at pH ∼ 5.
View Article and Find Full Text PDFEnviron Res
January 2025
College of Ecology and Environment, Xinjiang University, Urumqi 830046, China.
The objective of this investigation is to overcome the difficulties in fabricating cost-effective, eco-friendly porous geopolymers (PGs) by integrating Coal fly ash (CFA) and spodumene flotation tailings (SFT). This synthesis utilizes a unique blend of CFA and SFT in a 6:4 mass ratio, with specific attention to optimizing the pore architecture to improve the PGs' efficacy. Key parameters included a modulus of 1.
View Article and Find Full Text PDFMolecules
January 2025
School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China.
Ester collectors have rapidly developed into the main flotation collectors for copper sulfide minerals since they were developed. In this study, the collecting performance of four collectors, O-isopropyl-N-ethyl thionocarbamate ester (IPETC), 3-pentyl xanthate acrylate ester (PXA), O-isobutyl-N-allyl-thionocarbamate (IBALTC), and O-isobutyl-N-isobutoxycarbonyl-thionocarbamate (IBIBCTC), was investigated through microflotation tests, microcalorimetric measurements, and quantum chemical calculations. The results of the microflotation tests show that IBALTC and IPETC have stronger collecting abilities than IBIBCTC and PXA; the order of collecting ability is IBALTC > IPETC > IBIBCTC > PXA.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!